TE Connectivity, Amplimite HD-20 9 Way Panel Mount D-sub Connector Plug, 2.77mm Pitch

Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: CN
Productomschrijving

AMPLIMITE D-Sub Cable Connector, HD-20 Series, Solder Cup

A D-sub connector is a common type of electrical devise named by their D shaped metal shield feature. When they were introduced, D-subs were among the smallest connectors used on computer systems.

AMPLIMITE HD-20 Solder Cup d-sub cable mount d-sub connectors with tin plated shells and two piece 94V-0 rated black thermoplastic inserts. The shields of these AMPLIMITE HD-20 Solder Cup d-sub cable connectors offer full EMI shielding and ESD insulation and can be post molded or covered with enclosures. The crimped shield terminations enable low impedance and the shield crimp provides strain relief.

These AMPLIMITE HD-20 Solder Cup d-sub cable connectors are pre-loaded with duplex plated solder cup contacts and mate with HDE, HDF, HDP and HD-20 (board mount) series d-sub connectors.
For suitable backshells or cable clamps see stock numbers 680-9301, 719-9747 and 680-9355 typically.

The AMPLIMITE series are designed to be used in communication and data interfaces.
• 65% higher density than HD-20 connectors
• Space saving
• 94V0 black thermoplastic insert
• Tin plated, steel shell

Features and Benefits

• Shell sizes offer wide choice of contact positions - 9, 15, 25, 37 and 50.
• Lower cost, commercial version of the military approved series.
• Tin or zinc plated shells, with or without grounding indents.
• Crimp snap-in contacts allows loading of only the number of contacts being used.
• Available with shielding hardware and shielding enclosure kits.
• Numerous cable clamps and mating hardware options.
• Low cost, high performance, precision formed crimp contacts.

Accessories

• Crimp contacts – 446-787
• Male screw retainers – 450-9208 & 717-4498
• Female screw-locks – 717-4543 & 450-9270
• Locking post assembly – 450-9365
• Spring latch – 450-9321
• Latching block with threaded hole – 450-9371
• Latching block with slot recess – 680-9392

Approvals

UL, cUL, CSA

TE Connectivity AMPLIMITE D-Subminiature Connectors

Specificaties
Kenmerk Waarde
Number of Contacts 9
Gender Male
Body Orientation Straight
Mounting Type Panel Mount
Pitch 2.77mm
D Connector Type Standard D-Sub
Termination Method Solder
D-Sub Shell Size E
Current Rating 3.0A
Housing Material Steel
Voltage Rating 250.0 V
Length 30.8mm
Width 12.5mm
Depth 15.4mm
Dimensions 30.8 x 12.5 x 15.4mm
Minimum Operating Temperature -55.0°C
Contact Material Phosphor Bronze
Contact Plating Gold over Nickel
Maximum Operating Temperature +105°C
Series Amplimite HD-20
200 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
910 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each (In a Pack of 5)
2,48
(excl. BTW)
3,00
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
5 - 20
2,48 €
12,40 €
25 - 45
2,108 €
10,54 €
50 - 95
1,86 €
9,30 €
100 - 245
1,612 €
8,06 €
250 +
1,488 €
7,44 €
*prijsindicatie
Verpakkingsopties
Related Products
From RS PRO a high-performance D-Subminiature connector with ...
Description:
From RS PRO a high-performance D-Subminiature connector with a robust zinc plated steel shell and solder cup terminations that allow the easy connection of wires. These D-sub connectors are Performance Level 1 which exceeds DIN Class 2, have an RS232 ...
From RS PRO a durable, highly reliable D-Subminiature ...
Description:
From RS PRO a durable, highly reliable D-Subminiature connector designed for use in environments where high reliability is key. This connector has a steel shell and a diallyl phthalate insulator. Diallyl phthalate is a type of plastic which has good ...
Grey polyester insulator to UL94-V0 with gold over ...
Description:
Grey polyester insulator to UL94-V0 with gold over nickel plated contacts in a metal shell. Fit to Speedbloc® ribbon cable for end termination or daisy chaining.
Solder cup d-subs available in 5 industry sizes/positionsStandard ...
Description:
Solder cup d-subs available in 5 industry sizes/positionsStandard Density (9 pin, 15 pin, 25 pin, 37 pin, 50 pin).Low cost economy series.Nickel shells have indents to provide grounding and additional retention.Low cost & high performance, non-removable stamped contacts.Optional mounting hardware ...