Phoenix Contact, SUBCON-PLUS-PROFIB/PG 9 Way Right Angle Cable Mount D-sub Connector Plug

Wetgeving en conformiteit
Niet conform
Land van herkomst: DE

Phoenix Contact SUBCON-PLUS Profibus D-Sub Connectors 12 Mbps

This range of SUBCON-PLUs Profibus connectors are up to 12 Mbps in speed and work hand-in-hand with Phoenix Contacts PROFIBUS network. Connectivity is simple with the D-sub connector with spring cage terminal points for the input and a D-sub connection on the output. D-Sub connectors form a tight and secure bond with its mating adapter thanks to the screw connections.

These specific D-Sub connectors are suitable for all common fast connect PROFIBUS cables and RS-485 bus lines and you can switch to the D-sub orientation through a reversible connection blocks.

Features and benefits:

  • Can be used on all PROFIBUS systems up to 12 Mbps

  • When the optional terminating resistor is switched in, the output circuit is disconnected to aid fault finding by segmenting the network

  • Additional connection for a programming or service device

  • Spring terminal or screw terminal connector technology (...SC...)

  • Integral strain relief

  • Cable entry optionally left or right (exc. PROFIB/PG and PROFIB/PG/SC2)

  • Programming connection optional (...PG...)

  • Cable entry axial (...AX...)

  • ATEX Ex rating – Installation in potentially explosive areas is approved.

What is a d-sub connector?

D-sub connectors or D-subminiature connectors as they're commonly called are D-shaped connections that can contain a variety of pins and come in a variety of sizes. D-Sub connectors are typically used in connecting wires to PCBs to transfer a multitude of signal types and thanks to their screw method of connection they'll provide a robust and long-lasting strong connection.



BUS connectors

Rewireable bus interface connectors suitable for Bitbus, CAN-Bus, Interbus-S (Fieldbus) and Profibus systems. Compact and high quality, the 9-pole sub-D housings are available in bus node or bus termination versions and are colour-coded for easy identification. Service nodes are also available for CAN-Bus and Profibus systems, allowing online programming and repair. Each interface comes with detailed assembly instructions and mounting accessories.

Available in versions with horizontal or vertical cable outlets
Fast and reliable connection via screw terminals on the PCB
Bus terminations include SMT termination resistors
Colour-coded bodies aid installation and repair
Safe ESD protection thanks to fully insulated housings
Supplied with reliable crimp strain relief

Kenmerk Waarde
Number of Contacts 9
Gender Male
Body Orientation Right Angle
Mounting Type Cable Mount
Termination Method Spring Terminal
Current Rating 100.0mA
Housing Material Metal Plated Plastic
Voltage Rating 50.0 V
Length 60.0mm
Width 49.5mm
Depth 16.0mm
Dimensions 60 x 49.5 x 16mm
Maximum Operating Temperature +70°C
Minimum Operating Temperature -20.0°C
35 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
(excl. BTW)
(incl. BTW)
Aantal stuks
Per stuk
1 - 9
45,74 €
10 - 24
43,45 €
25 - 49
41,25 €
50 - 99
39,20 €
100 +
37,22 €
Related Products
For suitable hole cutters, refer to 'D' connector ...
For suitable hole cutters, refer to 'D' connector cutters (e.g. stock no. 477-8690). Rear entry release crimp contactsPlugs/shells tinned plated for shielding continuityRatchet controlled tool available separately.
From the trusted RS Pro brand, a series ...
From the trusted RS Pro brand, a series of waterproof field installable D-Sub connectors. The IP67 cable mount connectors feature silicone cable end gaskets and EDPM rubber pads. The shell is manufactured from professional quality SPCC grade steel with a ...
From FCT, a series of mixed contact D-Sub ...
From FCT, a series of mixed contact D-Sub connector kits with solder plug contacts. The kit consists of nickel plated diecast zinc hoods with straight cable entries. Hoods are easy to assemble and come complete with cable clamps, strain relief ...
A right angled, D-SUB connector from Phoenix Contact. ...
A right angled, D-SUB connector from Phoenix Contact. The 9-contact, male connector is part of the SUBCON series for universal use.Designed for using in the RS-485, RS-232 and RS-422 converter. • 35° angled cable entry and an internal connection unit ...