9 Way D-Sub Socket Connector Kit

  • RS-stocknr. 765-9476
  • Fabrikantnummer MHDM9-DB9S-K
  • Fabrikant MH Connectors
Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: GB
Productomschrijving

D-Sub Connector Kits with Straight Metal Hoods and Metalized Inserts

These Kits of MH Connectors D-Sub MHDM Series are straight 180° Die Cast Zinc nickel plated backshells and metallized compression inserts with either Pin or Socket connectors. The mating part of the contacts in these D-Sub MHDM Series Kits are Gold plated with the Solder Bucket terminations being either Tin or Gold plated.
Stock numbers 765-9472 , 765-9476 , 765-9482 , 765-9491 , 765-9508 and 765-9501 have stamped contacts.
Stock numbers 765-9485 , 765-9488 , 765-9494 , 765-9498 , 765-9505 and 765-9514 have machined contacts.

The Kits comprise of:

2 Backshell halves
2 Strain Relief Screws
2 Strain Relief Clamps
2 Housing screws
2 4-40 Thumbscrews
1 Set of metallized plastic inserts for 6.2, 8.2 and 10.2 mm diameter cable (Note maximum cable diameter is 13 mm)

D-Sub Connector Kits - MH

A range of D-sub Kits which contain a connector, hood and associated screws and cable glands or clamps as specified.

Specificaties
Kenmerk Waarde
Number of Contacts 9
Kit Type D-Sub Socket Connector Kit
Housing Material Steel
Body Orientation Straight
Contact Plating Gold over Nickel
Kit Contents Cable Clamp, Contact Insert, D-sub Socket Connector, Hood, Metalised Grommet Kit, UNC 4-40 Thumb Screws
Contact Material Copper Alloy
2 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
420 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
3,85
(excl. BTW)
4,66
(incl. BTW)
Aantal stuks
Per stuk
1 - 49
3,85 €
50 - 99
3,08 €
100 - 249
2,90 €
250 - 499
2,72 €
500 +
2,50 €
Related Products
Prototyping is made super easy with this range ...
Description:
Prototyping is made super easy with this range of jumper wires from MicroElektronika. This pack contains 10 jumper wires in an assortment of colours. Jumper wires, often just referred to as jumpers, are wires used on breadboards to create electronic ...
Suitable for military, industrial or commercial applications and ...
Description:
Suitable for military, industrial or commercial applications and computer interfacing etc. Use in conjunction with solder bucket D plugs and sockets and plastic/metallised hoods to provide IP67 rated in-line cable or chassis connectionComprises: 1 silicone seal, 2 short locking screws, ...
Series TMC connectors are available in various housing ...
Description:
Series TMC connectors are available in various housing sizes and with different numbers of pin. Fully insulated housing with integrated shielding platesTension relief with earth contact on shielding plateDual design and additional screw-in optionCable drop 15°Thread 4 → 40.
A common application for our range of Phoenix ...
Description:
A common application for our range of Phoenix Contacts D-Sub Connectors is to make a connection between a monitor and a PC, this is why they are increasingly becoming a household essential. Our D-Sub Connectors are a type of electrical ...