3M 103 Series Copolyester Elastomer, Steel D-sub Connector Backshell, 26 Way, Strain Relief

  • RS-stocknr. 770-9234
  • Fabrikantnummer 10326-32J0-000
  • Fabrikant 3M
Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: US
Productomschrijving

Round Cable Plastic Backshell

This range of 103 Series Mini Delta Ribbon (MDR) Backshells are .050" Plastic Shielded Junction Shells for Round Cable. The design of these 103 Series MDR Backshells consists of a plastic cover with straight cable exit and a two piece metal junction shell.
Part numbers 103xx-3210-00x for the 103 Series MDR Backshell have quick release latching and a one piece plastic shell.
Part numbers 103xx-3280-00x for the 103 Series MDR Backshell have quick release latching and a two piece plastic shell.
Part numbers 103xx-32J0-00x for the 103 Series MDR Backshell have thumb screws and a one piece plastic shell.

UL 94V-0 plastic outer shell
Suitable for use with IDC plugs stock no. 163-3285 (typically)

Mini Delta Ribbon (MDR)

Cable mount plugs and PCB mount receptacles with pre-loaded ribbon contacts for long life
Finger releasable latching backshells for cable mounting applications

A Mini Delta Ribbon (MDR) system designed for high density I/O applications on a 1.27mm pitch.

Specificaties
Kenmerk Waarde
Number of Contacts 26
Housing Material Copolyester Elastomer, Steel
Body Orientation Straight
Colour Beige
Strain Relief Yes
Series 103
9 op voorraad - levertijd is 1 werkdag(en)
Prijs Each
13,74
(excl. BTW)
16,63
(incl. BTW)
Aantal stuks
Per stuk
1 - 14
13,74 €
15 - 49
12,37 €
50 - 99
10,99 €
100 - 249
9,62 €
250 +
8,92 €
Related Products
Two-piece backshells for use with the 5.7mm Mega-Fit ...
Description:
Two-piece backshells for use with the 5.7mm Mega-Fit dual row receptacle housings to provide strain relief. These Mega-Fit receptacle backshells have a hermaphroditic dseign and are availble as standard 94V-0 versions (part numbers 200122-00xx) or with Glow Wire Compliance per ...
Right Angle D-Sub Backshell | Ethernet 90° Entry ...
Description:
Right Angle D-Sub Backshell | Ethernet 90° Entry available in:Standard (9 pin, 15 pin, 25 pin) or High Density (15 pin, 26 pin, 44 pin)Available in die cast for over 70 dB shielding.Easy backshell assembly reduces manufacturing cost.Non-conductive grommet/strain relief ...
2 piece diecast zinc backshells with plastic strain ...
Description:
2 piece diecast zinc backshells with plastic strain relief inserts and earth connectionNickel plate finish. Meets VDE0781 and FCC207 shielding regsAttenuation; >40dB (30MHz to 1GHz)Accepts 3.5mm to 13mm cable.
Nickel plated ABS hoods to UL94-V0 with conductive ...
Description:
Nickel plated ABS hoods to UL94-V0 with conductive plastic strain relief grommetMeets FCC20780 and European screening requirementsAccepts 4-12mm foil, lap or braided cable For size, see diecast hoods 460-985 etc.