TE Connectivity AMPLIMITE Series Zinc Alloy D-sub Connector Backshell, 25 Way

Datasheets
Wetgeving en conformiteit
Conform
Productomschrijving

AMPLIMITE D-Sub Connector, Series HDE, HDP RFI/EMI Straight Exit Shielded Backshells

AMPLIMITE straight exit two-piece RFI/EMI shielded backshell kits or cable clamps with die cast or metal plated plastic shields for use with HDE Metal-Shell and HDP Metal-Shell (tin plated only) d-sub cable mount connectors. These AMPLIMITE straight exit two-piece RFI/EMI shielded backshell kits accept a variety of shell sizes and cable diameters, please see table for details.
Part numbers 5745171-x, 5745172-x, 5747173-x, 5745174-x and 5745175-x have zinc alloy shields plated with bright nickel over bright copper.
Part numbers 5745854-x, 5747099-x, 5745833-x, 5747100-x and 5748677-x have thermoplastic shields plated with nickel over copper.
Each kit also contains zinc plated stainless steel 4-4- fillister head screws, hex nuts and 4-40 mounting screws. Stock number 680-9355 is also supplied with 4 grommets.
For ferrules see stock numbers 718-0730, 745-5791 and 680-9383 typically
For two piece spring latch see stock number 450-9321

Note

Jackscrews must be purchased separately
Shielded backshells will not accept connector housings with clinch nuts

TE Connectivity AMPLIMITE D-Subminiature Connectors

Specificaties
Kenmerk Waarde
Number of Contacts 25
D-Sub Shell Size B
Housing Material Zinc Alloy
Body Orientation Straight
Colour Silver
Series Amplimite
78 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
15,57
(excl. BTW)
18,84
(incl. BTW)
Aantal stuks
Per stuk
1 +
15,57 €
Verpakkingsopties
Related Products
TV NSA suitable for TV-CTV (MIL-DTL-38999 series III), ...
Description:
TV NSA suitable for TV-CTV (MIL-DTL-38999 series III), SC39 and RNJ LP connectors. Providing an electrical continuity between cable and connector assure a high level of EMI/RFI protectionEnable the use of straight or right angled heat shrink moulded pieces.
High quality diecast backshells with dual cable entryIdeal ...
Description:
High quality diecast backshells with dual cable entryIdeal for 'daisy-chaining' connection within -eg.- industrial BUS systems applicationsProvided with a blanking plate to maintain screening integrity at the end of a cable runAvailable in 9,15, 25, 37-wayFor cable diameters of 4.8 ...
From TE Connectivity, a range of superior quality ...
Description:
From TE Connectivity, a range of superior quality full metal D-Sub hoods for use with D-sub miniature connectors. The robust Quick Lock back shells feature a unique squeeze to release mechanism supporting effortless assembly and installation. Retro-fitting to existing systems ...
Right Angle D-Sub Backshell | Ethernet 90° Entry ...
Description:
Right Angle D-Sub Backshell | Ethernet 90° Entry available in:Standard (9 pin, 15 pin, 25 pin) or High Density (15 pin, 26 pin, 44 pin)Available in die cast for over 70 dB shielding.Easy backshell assembly reduces manufacturing cost.Non-conductive grommet/strain relief ...