3M 103 Series Polymer D-sub Connector Backshell, 26 Way, Strain Relief

  • RS-stocknr. 448-4531
  • Fabrikantnummer 10326-52A0-008
  • Fabrikant 3M
Datasheets
Wetgeving en conformiteit
Conform
Productomschrijving

Plastic Backshells

This range of the 103 Series .050" Mini Delta Ribbon (MDR) Connectors Plastic Solder Plug Junction Shell - Non Shielded Backshells are available with Screw or Quick Release Latching Mechanism. The design of the 103 Series MDR Junction Shell features a two-piece glass reinforced Backshell with Ground Strap and a metal Strain Relief Clamp

Straight exit for round cables
Compatible with 101XX-3000PE Plug
Metal strain relief clamp provides grounding for cable shield

103xx-52F0-xxx = Quick Release Latching Mechanism
103xx-52A0-xxx = Jack Screw

//media.rs-online.com/t_line/L299458-01.gif

Mini Delta Ribbon (MDR)

Cable mount plugs and PCB mount receptacles with pre-loaded ribbon contacts for long life
Finger releasable latching backshells for cable mounting applications

A Mini Delta Ribbon (MDR) system designed for high density I/O applications on a 1.27mm pitch.

All products adhere to the following specification, with exceptions as noted below.  
Body material: Glass filled polyester (PBT)
Flammability: UL94V-0
Contact material/plating  
Beryllium copper Plating
Class II sockets 0.76μm gold
Cable plugs 0.76μm gold
’D’ connectors 0.76μm gold
Board mount sockets 0.3μm gold
   
Phosphor bronze  
Class III sockets 0.38μm gold
Class II headers 0.76μm gold
Class III headers 0.38μm gold
Transition connectors Tin plated
   
Insulation resistance: 1´109 ohms min. at 500Vdc
Current rating: 1A (headers 2A)
Withstanding voltage 1000V r.m.s.
Temperature range: -55°C to +105°C
   
Performance level:  
Class II 200 mating cycles
Class III 50 mating cycles
Note: 'D' type connectors include steel shells. Latches for Class III headers are of nylon.  
Specificaties
Kenmerk Waarde
Number of Contacts 26
Housing Material Polymer
Body Orientation Straight
Colour Black
Strain Relief Yes
Series 103
35 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
675 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
6,84
(excl. BTW)
8,28
(incl. BTW)
Aantal stuks
Per stuk
1 - 14
6,84 €
15 - 49
6,55 €
50 - 99
5,65 €
100 - 249
5,50 €
250 +
4,95 €
Related Products
These metal hoods provide a shielded connection with ...
Description:
These metal hoods provide a shielded connection with electrical continuity between the chassis earth and the cable braid.The locking screws are 4-40 thread.
A series of non-locking hoods allowing the cable ...
Description:
A series of non-locking hoods allowing the cable to be fitted from above or from the side.
2 piece diecast zinc backshells with plastic strain ...
Description:
2 piece diecast zinc backshells with plastic strain relief inserts and earth connectionNickel plate finish. Meets VDE0781 and FCC207 shielding regsAttenuation; >40dB (30MHz to 1GHz)Accepts 3.5mm to 13mm cable.
Nickel plated ABS hoods to UL94-V0 with conductive ...
Description:
Nickel plated ABS hoods to UL94-V0 with conductive plastic strain relief grommetMeets FCC20780 and European screening requirementsAccepts 4-12mm foil, lap or braided cable For size, see diecast hoods 460-985 etc.