3M 103 Series ABS D-sub Connector Backshell, 14 Way, Strain Relief

  • RS-stocknr. 448-4503
  • Fabrikantnummer 10314-3210-000
  • Fabrikant 3M
Datasheets
Wetgeving en conformiteit
Conform
Productomschrijving

Round Cable Plastic Backshell

This range of 103 Series Mini Delta Ribbon (MDR) Backshells are .050" Plastic Shielded Junction Shells for Round Cable. The design of these 103 Series MDR Backshells consists of a plastic cover with straight cable exit and a two piece metal junction shell.
Part numbers 103xx-3210-00x for the 103 Series MDR Backshell have quick release latching and a one piece plastic shell.
Part numbers 103xx-3280-00x for the 103 Series MDR Backshell have quick release latching and a two piece plastic shell.
Part numbers 103xx-32J0-00x for the 103 Series MDR Backshell have thumb screws and a one piece plastic shell.

UL 94V-0 plastic outer shell
Suitable for use with IDC plugs stock no. 163-3285 (typically)

Mini Delta Ribbon (MDR)

Cable mount plugs and PCB mount receptacles with pre-loaded ribbon contacts for long life
Finger releasable latching backshells for cable mounting applications

A Mini Delta Ribbon (MDR) system designed for high density I/O applications on a 1.27mm pitch.

Specificaties
Kenmerk Waarde
Number of Contacts 14
Housing Material ABS
Body Orientation Straight
Colour Beige
Strain Relief Yes
Series 103
5 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
62 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
5,08
(excl. BTW)
6,15
(incl. BTW)
Aantal stuks
Per stuk
1 - 14
5,08 €
15 - 49
4,79 €
50 - 99
4,18 €
100 - 249
3,89 €
250 +
3,63 €
Related Products
MH Connectors range of MHDPPK SLIM Series Polyamide ...
Description:
MH Connectors range of MHDPPK SLIM Series Polyamide Hoods are suitable for use with any common Sub-D connectors as well as a selection of other ’D’ type connectors. Available in 7 different colour options, the MHDPPK SLIM hoods feature a ...
A series of non-locking hoods allowing the cable ...
Description:
A series of non-locking hoods allowing the cable to be fitted from above or from the side.
Nickel plated ABS hoods to UL94-V0 with conductive ...
Description:
Nickel plated ABS hoods to UL94-V0 with conductive plastic strain relief grommetMeets FCC20780 and European screening requirementsAccepts 4-12mm foil, lap or braided cable For size, see diecast hoods 460-985 etc.
Plastic hoods for D connectors, complete with quick ...
Description:
Plastic hoods for D connectors, complete with quick assembly strain relief grommets and full metal jack screws. Fits most types of D connectors, including IDCCable diameter 4-12mmMaterial UL 94-VØ Halogen free ABS.