TE Connectivity AMPLIMITE Series Polymer D-sub Connector Backshell, 9 Way, Strain Relief

Datasheets
Wetgeving en conformiteit
Conform
Productomschrijving

AMPLIMITE D-Sub Connector, Series HDE, HDP RFI/EMI Straight Exit Shielded Backshells

AMPLIMITE straight exit two-piece RFI/EMI shielded backshell kits or cable clamps with die cast or metal plated plastic shields for use with HDE Metal-Shell and HDP Metal-Shell (tin plated only) d-sub cable mount connectors. These AMPLIMITE straight exit two-piece RFI/EMI shielded backshell kits accept a variety of shell sizes and cable diameters, please see table for details.
Part numbers 5745171-x, 5745172-x, 5747173-x, 5745174-x and 5745175-x have zinc alloy shields plated with bright nickel over bright copper.
Part numbers 5745854-x, 5747099-x, 5745833-x, 5747100-x and 5748677-x have thermoplastic shields plated with nickel over copper.
Each kit also contains zinc plated stainless steel 4-4- fillister head screws, hex nuts and 4-40 mounting screws. Stock number 680-9355 is also supplied with 4 grommets.
For ferrules see stock numbers 718-0730, 745-5791 and 680-9383 typically
For two piece spring latch see stock number 450-9321

Note

Jackscrews must be purchased separately
Shielded backshells will not accept connector housings with clinch nuts

TE Connectivity AMPLIMITE D-Subminiature Connectors

Specificaties
Kenmerk Waarde
Number of Contacts 9
D-Sub Shell Size E
Housing Material Polymer
Body Orientation Straight
Colour Silver
Strain Relief Yes
Series Amplimite
Op voorraad - levertijd 3 à 4 werkdagen.
Prijs Each
7,61
(excl. BTW)
9,21
(incl. BTW)
Aantal stuks
Per stuk
1 - 9
7,61 €
10 - 24
6,47 €
25 - 49
5,72 €
50 +
4,94 €
Verpakkingsopties
Related Products
TV NSA suitable for TV-CTV (MIL-DTL-38999 series III), ...
Description:
TV NSA suitable for TV-CTV (MIL-DTL-38999 series III), SC39 and RNJ LP connectors. Providing an electrical continuity between cable and connector assure a high level of EMI/RFI protectionEnable the use of straight or right angled heat shrink moulded pieces.
A range of strain reliefs for use with ...
Description:
A range of strain reliefs for use with the PS-MIL series 2.54mm IDC ribbon cable connectors. These strain reliefs offer additional support to the flat ribbon cable and are available in a range of sizes.
From TE Connectivity, a range of superior quality ...
Description:
From TE Connectivity, a range of superior quality full metal D-Sub hoods for use with D-sub miniature connectors. The robust Quick Lock back shells feature a unique squeeze to release mechanism supporting effortless assembly and installation. Retro-fitting to existing systems ...
Top Entry D-Sub Backshells available in 4 industry ...
Description:
Top Entry D-Sub Backshells available in 4 industry sizes/positions:Standard (9, 15, 25, 37) or High Density (15, 26, 44, 62)Thumbscrews supplied with backshell.More robust design for those areas that need it.Fully tapped assembly holes allow easy assembly keeping manufacturing cost ...