TE Connectivity, Amplimite HD-20 GD-Zn Angled D-sub Connector Backshell, 15 Way, Strain Relief

Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: DE
Productomschrijving

Dual Entry Diecast Backshells

High quality diecast backshells with dual cable entry
Ideal for 'daisy-chaining' connection within -eg.- industrial BUS systems applications
Provided with a blanking plate to maintain screening integrity at the end of a cable run
Available in 9,15, 25, 37-way
For cable diameters of 4.8 to 11mm - except 9-way - 4.8 to 9mm

Note

The backshell fastening screws are thread forming screws - backshell screw holes manufactured unthreaded

Specificaties
Kenmerk Waarde
Number of Contacts 15
Housing Material GD-Zn
D-Sub Shell Size A
Body Orientation Angled
Strain Relief Yes
Series Amplimite HD-20
85 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
470 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
10,93
(excl. BTW)
13,23
(incl. BTW)
Aantal stuks
Per stuk
1 - 9
10,93 €
10 - 49
9,70 €
50 - 99
8,93 €
100 +
7,70 €
Related Products
Solid metal hoods with short and long jack ...
Description:
Solid metal hoods with short and long jack screws and anti-kink sleevingThe two halves of the hood lock into one anotherJack screws can be retrofittedOption of fitting hoods universally using locking mechanisms (100–7490)Ø 6.5 cable — 14 mm for flat ...
A series of non-locking hoods allowing the cable ...
Description:
A series of non-locking hoods allowing the cable to be fitted from above or from the side.
These metal hoods provide a shielded connection with ...
Description:
These metal hoods provide a shielded connection with electrical continuity between the chassis earth and the cable braid.The locking screws are 4-40 thread.
Right Angle D-Sub Backshell | Ethernet 90° Entry ...
Description:
Right Angle D-Sub Backshell | Ethernet 90° Entry available in:Standard (9 pin, 15 pin, 25 pin) or High Density (15 pin, 26 pin, 44 pin)Available in die cast for over 70 dB shielding.Easy backshell assembly reduces manufacturing cost.Non-conductive grommet/strain relief ...