MH Connectors, MHDM Zinc D-sub Connector Backshell, 25 Way, Strain Relief

Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: GB
Productomschrijving

MH Connectors MHDM Series

The MHDM range of Die-Cast Zinc Hoods from the MH MHulti Hood series feature a two piece zinc body with two body retaining screws. The MHulti series hood systems are designed with the assembler in mind, the internal cable retainer holds the cable in place while the rest of the hood is assembled providing quick and easy use. The MHDM series is supplied with a metallised grommet kit and clamp.

• 2-piece die-cast hoods
• Exceptional RFI/EMI shielding
• Designed for quick and easy assembly of cable to hood
• Cable is held in place whilst the rest of the assembly is completed
• Metallised plastic bushing insert provides maximum 360° shielding at the critical cable entry point
• Simple removal of the inserts allow for rework or maintenance

Specificaties
Kenmerk Waarde
Number of Contacts 25
Housing Material Zinc
D-Sub Shell Size B
Body Orientation Straight
Colour Silver
Strain Relief Yes
Series MHDM
125 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
2270 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
4,14
(excl. BTW)
5,01
(incl. BTW)
Aantal stuks
Per stuk
1 - 24
4,14 €
25 - 74
3,50 €
75 - 199
2,80 €
200 - 399
2,44 €
400 +
2,31 €
Related Products
MH Connectors range of MHDPPK SLIM Series Polyamide ...
Description:
MH Connectors range of MHDPPK SLIM Series Polyamide Hoods are suitable for use with any common Sub-D connectors as well as a selection of other ’D’ type connectors. Available in 7 different colour options, the MHDPPK SLIM hoods feature a ...
2 piece diecast zinc backshells with plastic strain ...
Description:
2 piece diecast zinc backshells with plastic strain relief inserts and earth connectionNickel plate finish. Meets VDE0781 and FCC207 shielding regsAttenuation; >40dB (30MHz to 1GHz)Accepts 3.5mm to 13mm cable.
Nickel plated ABS hoods to UL94-V0 with conductive ...
Description:
Nickel plated ABS hoods to UL94-V0 with conductive plastic strain relief grommetMeets FCC20780 and European screening requirementsAccepts 4-12mm foil, lap or braided cable For size, see diecast hoods 460-985 etc.
A range of rear entry plastic Backshell Hoods ...
Description:
A range of rear entry plastic Backshell Hoods form MH Connectors with 2-part screw together construction.Manufacturers Part Numbers:MHCCOV-xxSC-BK are coloured Black with two short 4-40 UNC jackscrews.MHCCOV-xxSC-LG are coloured Light Grey with two short 4-40 UNC jackscrews.MHCCOV-xxSCL-LG are coloured Light ...