FCT, FMK Die Cast Zinc D-sub Connector Backshell, 15 Way, Strain Relief

  • RS-stocknr. 291-6200
  • Fabrikantnummer FMK2G-K201 / 1731110060
  • Fabrikant FCT
Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: DE
Productomschrijving

FMK Series Metal Hoods, Straight and Angled 45°

These FMK Series Metal Hood Backshells have a Large Inner Chamber and an Angled or Straight Cable Outlet. This large amount of internal space is particularly suitable for D-sub connectors with special contacts. The design of the FMK Series Metal Hood Backshell includes strain relief on the cable outlet. The FMK Series Metal Hood Backshell is easy to assemble thanks to the catch spring system and pre-mounted locking screws. The FMK Series Metal Hood Backshells can be used with engagement hooks and locking or knurled screws.

FMKx: Angled
FMKxG: Straight
FMKxx-K201: Large Cable Outlet
FMKx-4881: Dual Cable Outlet

Note

Stock number 764-9668 has dual cable (Ø8 → 12 mm) entry slot

Approvals

UL E168813

Warning

  • Stock no. 291-6288 is supplied without anti-kink feature
Specificaties
Kenmerk Waarde
Number of Contacts 15
D-Sub Shell Size A
Housing Material Die Cast Zinc
Body Orientation Straight
Colour Silver
Housing Material Plating Nickel
Strain Relief Yes
Series FMK
309 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
30 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
6,45
(excl. BTW)
7,80
(incl. BTW)
Aantal stuks
Per stuk
1 - 24
6,45 €
25 - 99
5,63 €
100 - 249
5,09 €
250 +
4,58 €
Related Products
The DL range of zero insertion force (ZIF) ...
Description:
The DL range of zero insertion force (ZIF) multi-pole connectors, with high contact densities is commonly used on diagnostic and test and instrumentation equipment in medical, computer, audio, broadcast and avionics industries. Back shells are supplied with cable strain relief ...
Solid metal hoods with short and long jack ...
Description:
Solid metal hoods with short and long jack screws and anti-kink sleevingThe two halves of the hood lock into one anotherJack screws can be retrofittedOption of fitting hoods universally using locking mechanisms (100–7490)Ø 6.5 cable — 14 mm for flat ...
These metal hoods provide a shielded connection with ...
Description:
These metal hoods provide a shielded connection with electrical continuity between the chassis earth and the cable braid.The locking screws are 4-40 thread.
The Omron D-sub connector assembly hood with right-angle ...
Description:
The Omron D-sub connector assembly hood with right-angle connecting cable belongs to XM2S series, it is mainly used for office equipment interfaces. It has total 9 contacts also it has attached #4-40 lock screw. The metallized plastic hood provides noise ...