FCT, FMK Die Cast Zinc D-sub Connector Backshell, 9 Way, Strain Relief

  • RS-stocknr. 291-6187
  • Fabrikantnummer FMK1G / 1727040096
  • Fabrikant FCT
Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: DE
Productomschrijving

FMK Series Metal Hoods, Straight and Angled 45°

These FMK Series Metal Hood Backshells have a Large Inner Chamber and an Angled or Straight Cable Outlet. This large amount of internal space is particularly suitable for D-sub connectors with special contacts. The design of the FMK Series Metal Hood Backshell includes strain relief on the cable outlet. The FMK Series Metal Hood Backshell is easy to assemble thanks to the catch spring system and pre-mounted locking screws. The FMK Series Metal Hood Backshells can be used with engagement hooks and locking or knurled screws.

FMKx: Angled
FMKxG: Straight
FMKxx-K201: Large Cable Outlet
FMKx-4881: Dual Cable Outlet

Note

Stock number 764-9668 has dual cable (Ø8 → 12 mm) entry slot

Approvals

UL E168813

Warning

  • Stock no. 291-6288 is supplied without anti-kink feature
Specificaties
Kenmerk Waarde
Number of Contacts 9
Housing Material Die Cast Zinc
D-Sub Shell Size E
Body Orientation Straight
Colour Silver
Strain Relief Yes
Housing Material Plating Nickel
Series FMK
2482 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
6417 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
6,34
(excl. BTW)
7,67
(incl. BTW)
Aantal stuks
Per stuk
1 - 24
6,34 €
25 - 99
5,51 €
100 - 249
5,09 €
250 +
4,55 €
Related Products
Nickel plated die-cast zinc ADK backshells come as ...
Description:
Nickel plated die-cast zinc ADK backshells come as a complete kit comprising Shells, jackscrews and cable grommets to suit 4, 5, 7 and 9mm cable diameters.These backshells have self tapping T10 screws, a suitable driver would be 736-181.
Right Angle D-Sub Backshell | Ethernet 90° Entry ...
Description:
Right Angle D-Sub Backshell | Ethernet 90° Entry available in:Standard (9 pin, 15 pin, 25 pin) or High Density (15 pin, 26 pin, 44 pin)Available in die cast for over 70 dB shielding.Easy backshell assembly reduces manufacturing cost.Non-conductive grommet/strain relief ...
High quality diecast backshells with dual cable entryIdeal ...
Description:
High quality diecast backshells with dual cable entryIdeal for 'daisy-chaining' connection within -eg.- industrial BUS systems applicationsProvided with a blanking plate to maintain screening integrity at the end of a cable runAvailable in 9,15, 25, 37-wayFor cable diameters of 4.8 ...
ADK series RFI/EMI shielded two piece nickel plated ...
Description:
ADK series RFI/EMI shielded two piece nickel plated plastic backshell/cable clamps. These ADK series RFI/EMI shielded two piece nickel plated plastic backshells are made from UL94 V0 ABS with a nickel plating, have a 4-40 thread size and accept a ...