MH Connectors MHDPPK-SLIM Polyamide D-sub Connector Backshell, 9 Way, Strain Relief

Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: CN
Productomschrijving

Single Piece Hoods with Jackscrews

MH Connectors range of MHDPPK SLIM Series Polyamide Hoods are suitable for use with any common Sub-D connectors as well as a selection of other ’D’ type connectors. Available in 7 different colour options, the MHDPPK SLIM hoods feature a quick-snap locking system as well as sophisticated cable clamps for cable strain relief, providing protection to a range of cable sizes while in use. Suitable for cables up to 11.5mm in diameter, this range of connector hoods is available in 5 sizes from 9 to 50-way.

Features and Benefits

• Single piece hinged plastic construction
• Quick-snap locking system
• Sophisticated cable clamps for a variety of cables to be used
• Available in 9, 15, 25, 37, and 50-way
• Available in Black, Blue, Green, Grey, Ivory, Red and Yellow. (Not all colour variants are available in all sizes)
• Suitable for any common Sub-D connector
• Standard UNC 4-40 thumbscrews

Applications

• Computing
• Analog screens and video monitors
• Gaming systems
• Networking
• Music and video Studios

Specificaties
Kenmerk Waarde
Number of Contacts 9
D-Sub Shell Size E
Housing Material Polyamide
Body Orientation Straight
Colour Ivory
Strain Relief Yes
Series MHDPPK-SLIM
555 op voorraad - levertijd is 1 werkdag(en).
Prijs Each (In a Pack of 5)
2,072
(excl. BTW)
2,507
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
5 - 120
2,072 €
10,36 €
125 - 495
1,812 €
9,06 €
500 - 1245
1,554 €
7,77 €
1250 - 2495
1,398 €
6,99 €
2500 +
1,244 €
6,22 €
*prijsindicatie
Related Products
(connectors not included). Moulded covers for our range ...
Description:
(connectors not included). Moulded covers for our range of D multiple connectors providing insulation & cable retentionCover grey Noryl, cable clamp glass filled nylon50-way is top entry only.
From MH Connectors, a range of dual entry ...
Description:
From MH Connectors, a range of dual entry metal D-Sub connector back shells. The MHDU45 series of D-Sub hoods have twin 45° cable entry points suitable for 4.8 mm to 11.00 mm O/D cable. The hoods are held in place ...
The RS Pro backshell covers allow for either ...
Description:
The RS Pro backshell covers allow for either top or side cable entry. A lightweight ABS housing is nickel plated to optimise EMI/RFI shielding effectiveness. The backshell provides the perfect balance between durability and economical considerations. Lightweight ABS housing, nickel ...
For use with slide locking hoods, see stock ...
Description:
For use with slide locking hoods, see stock no. 719-5837, allowing in-line cable coupling of D-sub connectorsSimple to couple and decoupleSuitable for straight or 90° cable entry.