RS PRO Circuit Transformer, , 40 x 11mm diameter , 400:1

Datasheets
Wetgeving en conformiteit
Niet conform
Land van herkomst: IN
Productomschrijving

RS Pro CT’s are square type and encapsulated with polycarbonate. These metering CT’s feature sealable terminal covers and a wide range of primary current ratings. Available in various, Bus bar sizes, case widths, and mounting options.

Comprehensive class accuracy
Cost effective moulded case current transformer
Various mounting options including wall mounting, cable mounting and bus bar mounting
Wire sealable terminal covers
Primary current 5A to 7500A
Secondary current 1A or 5A
Over current limiting factor FS5, FS10, FS15
Rated frequency 50Hz or 60Hz
Rated continuous thermal current (standard) 1,2 x in
Rated short time thermal current with 60 x in, 1 s (Max 40kA)
Rated isolation level 0.72/3 kV or 0.72/4 kV
Altitude up to 2000 m
Ambient temperature -5°C to + 55°C (0-95% relative humidity,non condensing!)
Storage temperature -25°C to + 70°C

Specificaties
Kenmerk Waarde
Current Ratio 400:1
Inner Diameter 40 x 11mm
Overall Height 78mm
Overall Width 62mm
Overall Depth 40mm
Dimensions 62 x 40 x 78 mm
7 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
21,26
(excl. BTW)
25,72
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
21,26 €
5 - 9
20,41 €
10 - 24
19,56 €
25 - 49
18,71 €
50 +
17,86 €
Related Products
TF Series current sensors can be connected to ...
Description:
TF Series current sensors can be connected to DIRIS Digiware series and DIRIS B-30 series via rapid RJ12 connection. • Plug & play rapid RJ12 connection• High accuracy over the whole operating range• Ratings from 150 to 2000 A, depending ...
The RS PRO current transformer is clip fit ...
Description:
The RS PRO current transformer is clip fit square type and encapsulated with polycarbonate. This metering CT features sealable terminal covers and has a current ratio of 100:5. It is a surface mounted device. • Accuracy class 1• Cost-effective moulded ...
CT’s are square type and encapsulated with polycarbonate. ...
Description:
CT’s are square type and encapsulated with polycarbonate. These metering CT’s feature sealable terminal covers and a wide range of primary current ratings. Available in various, Bus bar sizes, case widths, and mounting options. Comprehensive class accuracyCost effective moulded case ...
CT’s are square type and encapsulated with polycarbonate. ...
Description:
CT’s are square type and encapsulated with polycarbonate. These metering CT’s feature sealable terminal covers and a wide range of primary current ratings. Available in various, Bus bar sizes, case widths, and mounting options. Comprehensive class accuracyCost effective moulded case ...