ABB CMS Series Current Sensor, 80A

  • RS-stocknr. 833-2879
  • Fabrikantnummer CMS-100S8
  • Fabrikant ABB
Datasheets
Wetgeving en conformiteit
Conform
Productomschrijving

ABB Circuit Monitoring System CMS

Circuit Monitoring Systems (CMS) are multichannel measurement systems for branch monitoring of electrical installations. Each system consists of a Control Unit and sensors with different measurement ranges and mounting possibilities. The systems can be installed easily within power distribution units. Due to the unique compact size, the system is also ideal as a retrofit solution for existing installations. Great importance has been placed on user friendliness, high accuracy and a wide measurement range (up to 160 A).

CMS-600 Supply- and Control Centre
Supplied as a unit with flat cable & connector set
Illuminated touch display
Intuitive menu navigation
Supply voltage 24 Vdc
Measure AC and DC currents up to 64 individual lines via CMS-Bus (4-wire flatcable)
Measured data can be remotely queried by a 2-wire RS-485 interface
RTU Modbus, Data rate 2400-115200 Baud
DIN Rail Mounting

Specificaties
Kenmerk Waarde
Nominal Current 80A
Supply Voltage 690 V ac, 1500 V dc
Sensor Type CMS Sensor
Mounting Type Cable Mount
Frequency Bandwidth 50/60 Hz
Bore Size 10mm
Accuracy ±0.7 %
Minimum Operating Temperature -25°C
Series CMS
Maximum Operating Temperature +70°C
Depth 45.5mm
Height 31.8mm
Width 45.5mm
tijdelijk niet op voorraad – nieuwe voorraad verwacht op 19/11/2019, met een levertijd van 2 à 3 werkdagen.
Prijs Each
65,74
(excl. BTW)
79,55
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
65,74 €
5 +
63,74 €
Related Products
Open loop current transducer with Hall effect measuring ...
Description:
Open loop current transducer with Hall effect measuring principleFor measuring DC, AC and pulse currentsWith galvanic separation between primary and secondary circuitsUnipolar voltage supplyFixed offset voltage with corresponding amplificationHousing made from insulating, self-extinguishing material UL94-V0.
Current sensors for electronic measurement of alternating, direct, ...
Description:
Current sensors for electronic measurement of alternating, direct, pulse and mixed currents with galvanic insulation between the primary circuit (strong current) and secondary circuit (electronic circuit).Hall Effect measuring principle.Used with AC variable speed drives, static converters for DC motor drives, ...
Measurement of dc currentsLarge apertureEasy panel mountingNo insertion ...
Description:
Measurement of dc currentsLarge apertureEasy panel mountingNo insertion lossesSupply voltage 20/50Vdc - 22/38VacAccuracy ±1%Size (HxWxD) 57.2 x 30 x 89.7mmOperating Temperature -20 → +50°CWeight 100g.
Closed Loop Hall Effect transducers for the accurate ...
Description:
Closed Loop Hall Effect transducers for the accurate measurement of current. The ASIC based transducer offers a ref in/out pin allowing the user to trim out offsets. AC/DC, and mixed current measurementClosed Loop, high accuracy (better than 1%)Unipolar 5V supply ...