LEM DHR Series Open Loop Current Sensor, 200A nominal current

  • RS-stocknr. 527-8539
  • Fabrikantnummer DHR 200 C10
  • Fabrikant LEM
Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: CN
Productomschrijving

DHR-C — AC / DC transformer, voltage or current output

AC / DC transformer with integrated signal preparation
Measures currents with VFD and SCR wavelength
Electrical isolation
Actual output; voltage or current
No excess losses
Cable entry to 32 mm Ø
Simple installation

Approvals

CE, UL

Specificaties
Kenmerk Waarde
Sensor Technology Open Loop
Nominal Current 200A
Supply Voltage 20 → 50 V dc
Sensor Type Hall Effect
Mounting Type Panel Mount
Frequency Bandwidth DC 20 to 6000 Hz
Accuracy ±1 %
Bore Size 32mm
Minimum Operating Temperature -40°C
Series DHR
Maximum Operating Temperature +70°C
Depth 25mm
Height 70mm
Output Voltage Range 0 → 10V
Width 90mm
3 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
4 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
199,54
(excl. BTW)
241,44
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
199,54 €
5 - 9
193,44 €
10 +
187,19 €
Related Products
Measures d.c. and a.c. pulsed and complex currents ...
Description:
Measures d.c. and a.c. pulsed and complex currents with galvanic isolation.,The transducer is capable of measuring nominal currents of 5, 6, 8, 12 and 25A by the use of a set of primary connection pins with an output of 24mA ...
Open loop current transducer with Hall effect measuring ...
Description:
Open loop current transducer with Hall effect measuring principleFor measuring DC, AC and pulse currentsWith galvanic separation between primary and secondary circuitsUnipolar voltage supplyFixed offset voltage with corresponding amplificationHousing made from insulating, self-extinguishing material UL94-V0.
LEM HO-NSM/SP33 series multi-range current transducers for the ...
Description:
LEM HO-NSM/SP33 series multi-range current transducers for the electronic measurement of current. The HO-NSM series can measure dc, ac and pulsed current with galvanic separation between the primary and the secondary circuit. Hall effect measuring principle Low power consumption Fixed ...
Measurement of ac, dc and pulsed currentGalvanic isolation ...
Description:
Measurement of ac, dc and pulsed currentGalvanic isolation between power and measuring circuitsBody material plastic to UL94-V0PCB mountingThese transducers comply with EN 50178.