LEM HAS Series Open Loop Current Sensor, ±150A

  • RS-stocknr. 301-9489
  • Fabrikantnummer HAS 50S
  • Fabrikant LEM
Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: CN
Productomschrijving

HAS-P Series

Single-pole Hall effect current transducers
Measurement of inserted conductor
Voltage output, Vout = ±4V
Capable of measuring complex signals
Excellent precision and good linearity
Low temperature drift
Body material Plastic; Polycarbonate PBT
Operating Temperature Range -10 to +80°C
Secondary connector: stock no. 543-7738

Series Current Type Sensed Isolation Test Voltage (kV) RMS Rated Voltage - Safe Op (V) Overload Capacity (A, t) Max. Current Consumption (mA)           D (mm) Weight (g)
HAS-50 ac; dc 3 500 30000 At ±15           40 80
HAS 100-200 ac; dc 3 500 30000 At ±15           40 80
  Electrical Off-set Voltage Thermal Drift Linearity % H (mm) W (mm)              
HAS-50 <±20 mV <±2 mV ±1 30 200              
HAS 100-200 <±20 mV <±1 mV ±1 30 200              
Specificaties
Kenmerk Waarde
Sensor Technology Open Loop
Nominal Current ±150A
Supply Voltage 15 V
Sensor Type Hall Effect
Mounting Type Panel Mount
Frequency Bandwidth DC to 50 kHz
Bore Size 20.4 x 10.4mm
Accuracy ±1 %
Series HAS
Minimum Operating Temperature -10°C
Maximum Operating Temperature +80°C
Depth 30mm
Height 30mm
Width 40mm
26 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
133 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
21,63
(excl. BTW)
26,17
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
21,63 €
5 - 9
20,98 €
10 +
20,30 €
Related Products
For the electronic measurement of currents, DC, AC, ...
Description:
For the electronic measurement of currents, DC, AC, pulsed, providing galvanic separation between the primary circuit and the secondary circuit. A Hall effect device, which provides galvanic isolation between primary and secondary circuitsSelf extinguishing plastic caseIdeal for measuring voltages associated ...
Open loop current transducer with Hall effect measuring ...
Description:
Open loop current transducer with Hall effect measuring principleFor measuring DC, AC and pulse currentsWith galvanic separation between primary and secondary circuitsUnipolar voltage supplyFixed offset voltage with corresponding amplificationHousing made from insulating, self-extinguishing material UL94-V0.
The Honeywell CNS series of closed loop Hall-effect ...
Description:
The Honeywell CNS series of closed loop Hall-effect current sensors utilise the null balance or zero magnetic flux feedback method to provide accurate and repeatable measurements. The devices produce an output current which can be converted to a voltage by ...
Open Loop Hall Effect current transducers with integral ...
Description:
Open Loop Hall Effect current transducers with integral primary connections for the accurate measurement of current. Open Loop (low power consumption)AC,DC, and mixed signal measurementExtended measuring range (3xlpn)Small sizeHX 03-20 (23.5x15.8x19mm)HX 25-50 (20x19x15.4mm)Multi turn PrimaryUnipolar power supply ...