LEM LTS Series Closed Loop Current Sensor, 0 → ±80A nominal current

  • RS-stocknr. 301-9473
  • Fabrikantnummer LTS 25NP
  • Fabrikant LEM
Datasheets
Wetgeving en conformiteit
Conform
Productomschrijving

LTS - P Series

Single-pole closed-loop current transducers based on the Hall effect principle
Voltage output
3 different input ranges via selection pins
Compact format for mounting on p.c.b.
Excellent precision and good linearity
Low temperature drift
Body material plastic to UL94-V0

Specificaties
Kenmerk Waarde
Sensor Technology Closed Loop
Nominal Current 0 → ±80A
Supply Voltage 5 V
Sensor Type Hall Effect
Mounting Type PCB Mount
Frequency Bandwidth DC 100 to 200 kHz
Bore Size 3.2mm
Accuracy ±0.2 %
Minimum Operating Temperature -40°C
Series LTS
Maximum Operating Temperature +85°C
Depth 10mm
Height 24mm
Width 22.2mm
18 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
100 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
12,18
(excl. BTW)
14,74
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
12,18 €
5 - 9
11,81 €
10 +
11,44 €
Related Products
For the electronic measurement of currents, DC, AC, ...
Description:
For the electronic measurement of currents, DC, AC, pulsed, providing galvanic separation between the primary circuit and the secondary circuit. A Hall effect device, which provides galvanic isolation between primary and secondary circuitsSelf extinguishing plastic caseIdeal for measuring voltages associated ...
CSLW Series miniature, open-loop AC current sensors from ...
Description:
CSLW Series miniature, open-loop AC current sensors from Honeywell. These sensors have a ratiometric output and incorporate a miniature linear Hall-effect sensor which is encapsulated in a PCB-mountable plastic package. A complete sensor is comprised of a sensor IC, flux ...
Compensated closed-loop Hall effect current transducers for the ...
Description:
Compensated closed-loop Hall effect current transducers for the measurement of continuous, alternating, pulsed and mixed currents. Excellent dynamic performanceGood linearity and low temperature driftGalvanic isolation between input and measuring circuitPCB mountingBody material plastic to UL 94-V0.
Single-pole Hall effect current transducersMeasurement of inserted conductorVoltage ...
Description:
Single-pole Hall effect current transducersMeasurement of inserted conductorVoltage output, Vout = ±4VCapable of measuring complex signalsExcellent precision and good linearityLow temperature driftBody material Plastic; Polycarbonate PBTOperating Temperature Range -10 to +80°CSecondary connector: stock no. 543-7738.