Honeywell CSL Series Open Loop Current Sensor, 0 → 72A

  • RS-stocknr. 181-2129
  • Fabrikantnummer CSLA2CD
  • Fabrikant Honeywell
Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: MX
Productomschrijving

Honeywell CSLA Series LOHET II Current Sensors

Linear current sensors from Honeywell incorporating LOHET II Hall effect transducers. These devices have increased temperature stability and 10 times less temperature drift than the LOHET I types and produce a ratiometric output voltage that varies from 19% to 81% of the supply voltage as the magnetic field varies within the rated flux range. They have push-pull outputs which are capable of sourcing and sinking current.

• AC or DC current sensing with linear output
• Fast response time
• Output voltage isolated from input
• Maximum current limited only by conductor size
• Simple through-hole design
• Operating temperature range -25 to 85°C

//media.rs-online.com/t_line/L650548-01.gif
//media.rs-online.com/t_line/LD650548-01.gif
//media.rs-online.com/t_line/LE650548-01.gif
//media.rs-online.com/t_line/LI650548-01.gif
Specificaties
Kenmerk Waarde
Sensor Technology Open Loop
Nominal Current 0 → 72A
Supply Voltage 6 → 12 V dc
Sensor Type Hall Effect
Mounting Type PCB Mount
Bore Size 10.9mm
Series CSL
Minimum Operating Temperature -25°C
Maximum Operating Temperature +85°C
Depth 10.4mm
Height 35.6mm
Width 34.3mm
14 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
100 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
22,46
(excl. BTW)
27,18
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
22,46 €
5 - 9
21,78 €
10 +
21,08 €
Related Products
Sifam Tinsley Theta 20A/20V compact programmable transducers measure ...
Description:
Sifam Tinsley Theta 20A/20V compact programmable transducers measure and convert AC voltage or current input into a load independent DC output signal. Featuring an LCD display and are on-site configurable. True RMS measurement On-site programmable inputs On-site selectable output: DC ...
MCR-SL-CUC series universal current transducer for measuring dc, ...
Description:
MCR-SL-CUC series universal current transducer for measuring dc, ac, and distorted currents. Universal current measurement, no shunt requiredCompact dimensions also enable distributed useVariable mounting on DIN rail and mounting plateSimple connection method due to COMBICON plug-in connection terminal blocks.
Specially adapted to the requirements of industrial applicationsWide ...
Description:
Specially adapted to the requirements of industrial applicationsWide selection helps with adaptation to your applicationPermissible temperature range -40 °C → +70 °C2 metre lengthCan freely be cut to length.
Balluff BIP series inductive positioning sensors detect the ...
Description:
Balluff BIP series inductive positioning sensors detect the position of encoders within the measuring range and outputs this position as IO-Link process data. LEDs indicate values within or outside of the measuring range. IO-Link communicationStatus LEDsIP67 RatedCompact designNon-contactHigh repeat accuracyHigh ...