LEM LA Series Closed Loop Current Sensor, 0 150A, 50mArms output current

  • RS-stocknr. 179-6667
  • Fabrikantnummer LA 100-P
  • Fabrikant LEM
Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: CN
Productomschrijving

LA-P Series

Compensated closed-loop Hall effect current transducers for the measurement of continuous, alternating, pulsed and mixed currents

Excellent dynamic performance
Good linearity and low temperature drift
Galvanic isolation between input and measuring circuit
PCB mounting
Body material plastic to UL 94-V0

//media.rs-online.com/t_line/L286311-01.gif
//media.rs-online.com/t_line/LD180735-01.gif
//media.rs-online.com/t_line/LE180735-01.gif
Specificaties
Kenmerk Waarde
Sensor Technology Closed Loop
Nominal Current 0 150A
Output Current Range 50mArms
Supply Voltage 12 15 V
Sensor Type Hall Effect
Mounting Type PCB Mount
Frequency Bandwidth DC to 200 kHz
Accuracy ±0.7 %
Bore Size 12.7 x 7mm
Series LA
Minimum Operating Temperature -40°C
Maximum Operating Temperature +85°C
Depth 14.45mm
Height 27.6mm
Width 36.5mm
Tijdelijk niet op voorraad – nieuwe voorraad verwacht op 06/03/2020, met een levertijd van 1 werkdag.
Prijs Each
23,82
(excl. BTW)
28,82
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
23,82 €
5 - 9
23,09 €
10 +
22,34 €
Related Products
Sifam Tinsley Theta 20A/20V compact programmable transducers measure ...
Description:
Sifam Tinsley Theta 20A/20V compact programmable transducers measure and convert AC voltage or current input into a load independent DC output signal. Featuring an LCD display and are on-site configurable. True RMS measurement On-site programmable inputs On-site selectable output: DC ...
The optional holding device ensures the Rogowski coil ...
Description:
The optional holding device ensures the Rogowski coil is securely seated on busbars that are 5 ... 10 mm thick. During installation, the coil housing is pushed onto the flange of the holding device and snaps in automatically.
Single-pole Hall effect current transducersMeasurement of inserted conductorVoltage ...
Description:
Single-pole Hall effect current transducersMeasurement of inserted conductorVoltage output, Vout = ±4VCapable of measuring complex signalsExcellent precision and good linearityLow temperature driftBody material Plastic; Polycarbonate PBTOperating Temperature Range -10 to +80°CSecondary connector: stock no. 543-7738.
Passive current transformers without auxiliary powerConvert ac into ...
Description:
Passive current transformers without auxiliary powerConvert ac into analogue signals 1 to 20mA or 0 to 10VLimit monitorLimit value and alarm suppression time set by two potentiometers1 NO, 1NC relay contact.