LEM ATO Series Current Transducer, 32A nominal current

  • RS-stocknr. 177-4925
  • Fabrikantnummer ATO-32-B333-D10
  • Fabrikant LEM
Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: CN
Productomschrijving

ATO series is a split core current transformer for the electronic measurement of AC waveform current with galvanic separation between the primary circuit (power) and the secondary circuit (measurement).ATO series is an ideal current transformer for new Smart-Grid applications.

Split-core current transformer
Accuracy class 1
Voltage output 333 mV at IPr
⌀ 16 mm sensing aperture
1 m output cable
Ambient temperature −10 °C … +55 °C
Very low cost solution
Slot for attaching the C.T. on the primary with plastic tie
DIN rail adapter (optional).
No interruption of electricity during installation on insulated conductors
Quick, non-intrusive and easy setup
Provide a calibrate output.

Specificaties
Kenmerk Waarde
Nominal Current 32A
Transformer Type Split Core
Mounting Type DIN Rail
Frequency Bandwidth 1.5 kHz
Bore Size 10mm
Series ATO
Minimum Operating Temperature -10°C
Maximum Operating Temperature +55°C
Depth 32mm
Height 45.5mm
Width 33.5mm
33 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
45,05
(excl. BTW)
54,51
(incl. BTW)
Aantal stuks
Per stuk
1 +
45,05 €
Related Products
Current sensors with circular split core.Measurement of direct, ...
Description:
Current sensors with circular split core.Measurement of direct, alternating and pulse current with galvanic insulation.Connection using Molex 5045-04/AG connector.Compact size.Opening diameter: 21 mm.
Electronic measurement of voltage: DC, AC, pulsed..., with ...
Description:
Electronic measurement of voltage: DC, AC, pulsed..., with galvanic separation between the primary and the secondary circuit. Features:Bipolar and insulated measurement up to 1500 VVoltage outputPCB mount8 pins5 V unipolar power supply.Advantages:Low consumption and low lossesCompact designVery low sensitivity to ...
Single-pole Hall effect current transducersMeasurement of inserted conductorVoltage ...
Description:
Single-pole Hall effect current transducersMeasurement of inserted conductorVoltage output, Vout = ±4VCapable of measuring complex signalsExcellent precision and good linearityLow temperature driftBody material Plastic; Polycarbonate PBTOperating Temperature Range -10 to +80°CSecondary connector: stock no. 543-7738.
When using primary bracket and push-through opening, for ...
Description:
When using primary bracket and push-through opening, for example, differential current can be measuredThe rated primary current range IPN can be set to 8 A, 12 A or 25 A for LAH 25-NP/SP3, depending on the input pin configurationFor LAH ...