LEM LAX Series Closed Loop Current Sensor, 0 → 160A nominal current, 50mA output current

  • RS-stocknr. 497-401
  • Fabrikantnummer LAX 100-NP
  • Fabrikant LEM
Datasheets
Wetgeving en conformiteit
Conform
Productomschrijving

LAX 100-NP Current Sensor

Small size Hall Effect sensor for fitting to printed circuits to measure currents up to 100 A RMS.
Current measurements of up to 16 A; 25 A; 33 A; 50 A or 100 A RMS based on primary connections made on the printed circuit.
This sensor is suitable for industrial applications such as variable speed controls, continuous power supplies (UPS) and cut-out power supplies (SMPS).
(L= 32 mm W = 27 mm H = 16.35 mm).

//media.rs-online.com/t_line/L0497401-10.gif
Specificaties
Kenmerk Waarde
Sensor Technology Closed Loop
Nominal Current 0 → 160A
Output Current Range 50mA
Supply Voltage 11.4 → 15.75 V
Sensor Type Hall Effect
Mounting Type PCB Mount
Frequency Bandwidth >300 kHz
Accuracy ±0.91 %
Minimum Operating Temperature -40°C
Series LAX
Maximum Operating Temperature +85°C
Depth 16.35mm
Height 32mm
Width 25.5mm
18 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
63 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
18,50
(excl. BTW)
22,38
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
18,50 €
5 - 9
17,93 €
10 +
17,35 €
Related Products
For the electronic measurement of currents, DC, AC, ...
Description:
For the electronic measurement of currents, DC, AC, pulsed, providing galvanic separation between the primary circuit and the secondary circuit. A Hall effect device, which provides galvanic isolation between primary and secondary circuitsSelf extinguishing plastic caseIdeal for measuring voltages associated ...
Open loop current transducer with Hall effect measuring ...
Description:
Open loop current transducer with Hall effect measuring principleFor measuring DC, AC and pulse currentsWith galvanic separation between primary and secondary circuitsUnipolar voltage supplyFixed offset voltage with corresponding amplificationHousing made from insulating, self-extinguishing material UL94-V0.
The Honeywell CNS series of closed loop Hall-effect ...
Description:
The Honeywell CNS series of closed loop Hall-effect current sensors utilise the null balance or zero magnetic flux feedback method to provide accurate and repeatable measurements. The devices produce an output current which can be converted to a voltage by ...
Compensated closed-loop Hall effect current transducers for the ...
Description:
Compensated closed-loop Hall effect current transducers for the measurement of continuous, alternating, pulsed and mixed currents. Excellent dynamic performanceGood linearity and low temperature driftGalvanic isolation between input and measuring circuitPCB mountingBody material plastic to UL 94-V0.