Allegro Microsystems ACS730KLCTR-40AB-T, Current Sensor 8-Pin, SOIC

Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: PH
Productomschrijving

The Allegro™ ACS730 current sensor family provides economical and precise solutions for AC or DC current sensing in industrial, commercial, and communications systems. The device package allows for easy implementation by the customer. Typical applications include motor control, load detection and management, switched-mode power supplies, and overcurrent fault protection.The device consists of a precise, low-offset, linear Hall sensor circuit with a copper conduction path located near the surface of the die.

Current Sensing 40A High bandwidth 1 MHz analog output
1.2 mΩ primary conductor resistance for low power loss and high inrush current withstanding capability
5 V, single supply operation
Output voltage proportional to AC or DC current
Factory-trimmed sensitivity and quiescent output voltage for improved accuracy
High PSRR for noisy

Specificaties
Kenmerk Waarde
Offset Voltage 75mV
Package Type SOIC
Pin Count 8
Mounting Type Surface Mount
Dimensions 4.9 x 3.9 x 1.5mm
Maximum Input Voltage 5.5 V
Minimum Input Voltage 4.5 V
Product Height 1.5mm
Product Length 4.9mm
Product Width 3.9mm
26 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
146 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each (In a Pack of 2)
4,555
(excl. BTW)
5,512
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
2 - 18
4,555 €
9,11 €
20 - 48
3,555 €
7,11 €
50 - 98
2,55 €
5,10 €
100 - 248
2,425 €
4,85 €
250 +
2,305 €
4,61 €
*prijsindicatie
Verpakkingsopties
Related Products
Current Sensing Amplifiers have a voltage output that ...
Description:
Current Sensing Amplifiers have a voltage output that is proportional to the volt drop across a very low value resistor, usually in a high-current power rail. Hence they measure the current flowing in that power rail.
The Allegro high current sensor IC packages are ...
Description:
The Allegro high current sensor IC packages are fully integrated current sensor solutions that provide high accuracy and reliability. These sensors are automotive-grade devices that can take the heat and deliver highly accurate open-loop current sensing in the most harsh ...
The PAC1932 is a dual power monitor and ...
Description:
The PAC1932 is a dual power monitor and energy monitor that reports on bus voltage and sense voltage 16-bits of resolution. Power is reported as a simultaneous product of two 16-bit independent bus and sense voltages. All registers are accessible ...
The Sensitec current sensor is designed for highly ...
Description:
The Sensitec current sensor is designed for highly dynamic electronic measurements of DC, AC, or pulsed currents with integrated galvanic isolation. The sensor device includes a high-precision sensor signal conditioner IC providing internal feedback of a compensation current for optimum ...