NCS214RMUTAG onsemi, Current Sense Amplifier Single Rail to Rail 10-Pin UQFN
- RS-stocknr.:
- 178-4424
- Fabrikantnummer:
- NCS214RMUTAG
- Fabrikant:
- onsemi
Niet meer leverbaar – bekijk hieronder eventuele alternatieven of neem contact op met onze Customer Service
Alternatief
Dit product is momenteel niet beschikbaar. Hierbij onze aanbeveling voor een alternatief product.
- RS-stocknr.:
- 178-4424
- Fabrikantnummer:
- NCS214RMUTAG
- Fabrikant:
- onsemi
Datasheets
Wetgeving en conformiteit
Productomschrijving
The NCS214R and NCV214R (AEC- Q100 qualified) are voltage output, current sense amplifiers that can measure voltage across shunts at common−mode voltages from −0.3 V to 26 V, independent of supply voltage. With a fixed gain of 100V/V, the low offset of the zero−drift architecture enables current sensing across the shunt with maximum voltage drops as low as 10 mV full−scale.
High-side current sensing for high voltage systems
Low Ohm value current sense resistors
High accuracy over temperature leading to better power efficiency
Wide supply voltage range provides system flexibilty
Low Ohm value current sense resistors
High accuracy over temperature leading to better power efficiency
Wide supply voltage range provides system flexibilty
Specificaties
Kenmerk | Waarde |
|---|---|
| Power Supply Type | Single |
| Typical Single Supply Voltage | 5 V |
| Minimum CMRR | 105dB |
| Number of Channels per Chip | 1 |
| Output Type | Rail to Rail |
| Maximum Supply Current | 80 μA |
| Mounting Type | Surface Mount |
| Package Type | UQFN |
| Pin Count | 10 |
| Dimensions | 1.4 x 1.8 x 0.55mm |
| Height | 0.55mm |
| Length | 1.4mm |
| Maximum Operating Supply Voltage | 26 V |
| Maximum Operating Temperature | +125 °C |
| Minimum Operating Temperature | -40 °C |
| Width | 1.8mm |
| Minimum Operating Supply Voltage | 2.2 V |