NCS213RSQT2G onsemi, Current Sense Amplifier Single Rail to Rail 6-Pin SC-70
- RS-stocknr.:
- 178-4386
- Fabrikantnummer:
- NCS213RSQT2G
- Fabrikant:
- onsemi
3000 op voorraad - levertijd is 1 werkdag(en).
Toegevoegd
Prijs Per stuk (op een rol 3000)
€ 0,347
(excl. BTW)
€ 0,42
(incl. BTW)
| Aantal stuks | Per stuk | Per reel* |
| 3000 + | € 0,347 | € 1.041,00 |
| *prijsindicatie | ||
- RS-stocknr.:
- 178-4386
- Fabrikantnummer:
- NCS213RSQT2G
- Fabrikant:
- onsemi
Datasheets
Wetgeving en conformiteit
- Land van herkomst:
- MY
Productomschrijving
The NCS213R and NCV213R (AEC- Q100 qualified) are voltage output, current sense amplifiers that can measure voltage across shunts at common−mode voltages from −0.3 V to 26 V, independent of supply voltage. With a fixed gain of 50 V/V, the low offset of the zero−drift architecture enables current sensing across the shunt with maximum voltage drops as low as 10 mV full−scale. These devices can operate from a single +2.2 V to +26 V power supply, drawing a maximum of 80 μA of supply current.
High-side current sensing for high voltage systems
Low Ohm value current sense resistors
High accuracy over temperature leading to better power efficiency
Wide supply voltage range provides system flexibilty
Low Ohm value current sense resistors
High accuracy over temperature leading to better power efficiency
Wide supply voltage range provides system flexibilty
Specificaties
Kenmerk | Waarde |
|---|---|
| Power Supply Type | Single |
| Typical Single Supply Voltage | 5 V |
| Minimum CMRR | 100dB |
| Number of Channels per Chip | 1 |
| Output Type | Rail to Rail |
| Maximum Supply Current | 80 μA |
| Mounting Type | Surface Mount |
| Package Type | SC-70 |
| Pin Count | 6 |
| Dimensions | 2.2 x 1.35 x 1mm |
| Height | 1mm |
| Length | 2.2mm |
| Maximum Operating Supply Voltage | 26 V |
| Width | 1.35mm |
| Minimum Operating Temperature | -40 °C |
| Minimum Operating Supply Voltage | 2.2 V |
| Maximum Operating Temperature | +125 °C |