Tektronix TCP202A Current Probe

  • RS-stocknr. 796-2687
  • Fabrikantnummer TCP202A
  • Fabrikant Tektronix
Datasheets
Wetgeving en conformiteit
Vrijgesteld
Land van herkomst: CN
Productomschrijving

Tektronix AC/DC Current Probes TCP0020, TCP2020 & TCP202A

Tektronix current probes include: TCP0020 ( 796-2696 ); TCP2020 ( 796-6705 ); TCP202A ( 796-2687 ). Their applications cover power supplies, semiconductor devices, power inverters/converters, electronic ballasts, industrial/consumer electronics, mobile communications, motor drives and transportation systems.

Easy to use and accurate AC/DC current measurements
Core jaw diameter of 5mm (0.2 in)
Accurate measurement of current levels as low as 10mA per division
High accuracy with typically less than 1% DC gain error
Split-core construction allows easy circuit connection
Low noise and DC drift

Connects directly to oscilloscopes with the TekVPI probe interface
Provides automatic units scaling and readout on the oscilloscope display
One-button Degauss and AutoZero control for ease of use
Easy access to scope-displayed probe menu for probe setup control and operating status information
Remote control capability through TekVPI oscilloscope

TCP0020

For use with Tektronix DPO2000 & MSO2000
BNC output connects to most oscilloscopes and other measuring equipment (>100 kΩ termination required)
Degauss button and thumbwheel for DC offset adjustment

TCP2020

Connects directly to oscilloscopes with the TekVPI probe interface
Provides automatic units scaling and readout on the oscilloscope display
Degauss button and thumbwheel for DC offset adjustment

TCP202A

Supplied with

Probe ground lead 6 in (152.4 mm) long, Nylon carrying case, instruction manual (English)

Specificaties
Kenmerk Waarde
Current 15A
Probe Type AC/DC
Maximum Bandwidth 50000kHz
Maximum Conductor Size 3.8mm
Safety Category CAT I 300 V
Series TCP
Safety Category Level CAT I
Model Number p TCP202
Best Accuracy ±1 %, ±3 %
Safety Category Voltage 300V
Bandwidth 50MHz
4 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
2.950,00
(excl. BTW)
3.569,50
(incl. BTW)
Aantal stuks
Per stuk
1 +
2.950,00 €
Related Products
The Tektronix ’long nose’ style clamp-on probe uses ...
Description:
The Tektronix ’long nose’ style clamp-on probe uses a Hall Effect current sensor to provide a voltage output to oscilloscopes. Equipped with a BNC connector, it can be used with a shrouded banana plug adapter*1. It can also be used ...
The TA300 is a 100 kHz bandwidth, single-range ...
Description:
The TA300 is a 100 kHz bandwidth, single-range 40 A AC or DC current probe using the D9 connector specific to the PicoScope 4444 differential oscilloscope. On connection with the scope, the probe is instantly sensed and the vertical range ...
The TA301 is a high-bandwidth, high-current probe fitted ...
Description:
The TA301 is a high-bandwidth, high-current probe fitted with a D9 connector specifically designed to work with the PicoScope 4444 differential oscilloscope. The probe is automatically sensed by the PicoScope 4444 oscilloscope and features two current ranges: 200 A and ...
5 different probes covering a wide range of ...
Description:
5 different probes covering a wide range of applications.Maximum current measurement coverage up to 6000 Amps.Maximum voltage insulation up to 10 kV peak.Connect to a wall plug or use with batteries.Low loading of the circuit under test.Wide coil operating temperature ...