Fluke i30s Current Probe & Clamp, With RS Calibration

  • RS-stocknr. 653-9857
  • Fabrikantnummer i30s
  • Fabrikant Fluke
Datasheets
Wetgeving en conformiteit
N.v.t.
Land van herkomst: CN
Productomschrijving

i30s 30A High Resolution, High Bandwidth Oscilloscope Current Probe

The i30 may be used in conjunction with bench and portable oscilloscopes for accurate non-intrusive ac & dc current measurement.,Applications include: inverters, switch mode power supplies, industrial controllers, automotive leakage currents and other applications requiring accurate isolated current measurement.

Hall effect sensing of a.c. and d.c. current
Power LED warns of low battery by flashing
Zero adjust knob to accommodate offsets
The wide, flat frequency response means this probe exhibits a fast response when measuring current pulses
2.0m flying lead terminated with 50Ω BNC plugs
Designed to meet EN61010-1, EN61010-2-032 installation CAT III 300V
Withstands overloads to 500A

Supplied with

Alkaline PP3 battery, 4mm shrouded plug adaptor and operators manual.

Buy Fluke products and claim another Fluke product free.
Between September 1, 2020 and December 15, 2020 customer who purchase a Fluke product (inc. Fluke Networks) have the opportunity to claim a free product through the Fluke website with the original proof of purchase, invoice, or receipt. The product can be claimed by visiting the Fluke website -
www.fluke.ie/freefluke (Ireland)
www.fluke.be/freefluke (Belgium)
www.fluke.nl/freefluke (Netherlands)
www/fluke.no/freefluke (Norway)
www.fluke.se/freefluke (Sweden)
www.fluke.com/en/freefluke (South Africa)
There are six levels of free tools to claim. They are separated based on the value of the qualifying purchase, starting at as little as only €100. For each level there is a fixed range of products to claim, based on the value of the original purchase.

Warning

  • Use of the probe on uninsulated conductors is limited to 300 V ac rms or dc and frequencies below 1 kHz.
Specificaties
Kenmerk Waarde
Probe Type AC/DC
Calibrated RSCAL
Maximum Conductor Size 19mm
Safety Category CAT III 300 V
Safety Category Level CAT III
Model Number p I30S
Best Accuracy ±1% + 2 mA
Safety Category Voltage 300V
Bandwidth DC to 100 kHz
10 op voorraad - levertijd is 1 werkdag(en) plus 1 dag extra in verband met gekalibreerd artikel. Gekalibreerde producten kunnen niet worden geretourneerd.
Prijs Each
725,00
(excl. BTW)
877,25
(incl. BTW)
Aantal stuks
Per stuk
1 +
725,00 €
Related Products
The Probes can be used to measure ac ...
Description:
The Probes can be used to measure ac current up to 6000 A. The flexible measuring head allows current measurements on conductors that are hard to reach or inaccessible using typical clamp-on current probes.
The Tektronix current probe amplifier is a state ...
Description:
The Tektronix current probe amplifier is a state of the art device used with the Tektronix TCP404XL probe. It also seamlessly integrates with the Tektronix TDS series oscilloscopes. When used with this probe, the current probe amplifier provides a wide ...
Current clamp specifically designed for use with oscilloscopesClamp ...
Description:
Current clamp specifically designed for use with oscilloscopesClamp makes it possible to monitor current waveforms directly and without breaking a connection.
Buy Fluke products and claim another Fluke product ...
Description:
Buy Fluke products and claim another Fluke product free.Between September 1, 2020 and December 15, 2020 customer who purchase a Fluke product (inc. Fluke Networks) have the opportunity to claim a free product through the Fluke website with the original ...