Fluke FLUKE-707EX Current Loop Calibrator 24mA RS Calibration

  • RS-stocknr. 455-3615
  • Fabrikantnummer FLUKE-707EX
  • Fabrikant Fluke
Datasheets
Wetgeving en conformiteit
N.v.t.
Land van herkomst: US
Productomschrijving

Fluke 707Ex Intrinsically Safe mA Loop Calibrator

Extremely fast and easy to use, Fluke offers a push-button and knob-base current loop calibrator which is an intrinsically safe instrument for use in potentially explosive environments. Designed for high performance one handed operation, calibration, maintenance, measurement and repairs of current loops, assisting users in working more accurately and efficiently.

A clear large simultaneous mA and % of span display, alongside the simple rotary button allows adjustments and quick selections with one hand. Housed in a robust protective case, the 9V battery can also be changed without breaking the calibration seal.

Features and Benefits:

• -10ºC to 55ºC operating temperature
• Simultaneous mA and % display
• 0-100% span check
• 24 volt internal loop supply
• HART® compatible resistance connected in series with the loop supply for compatibility with HART communicators
• 0.015% mA accuracy
• 1 μA resolution for mA source, simulate, and measure

FAQ's

What is a current loop calibrator?

Current loop calibrators are specially designed instruments for current loop trouble shooting, testing and calibration. They can source current on unpowered devices in a loop, simulate the operation of loop powered transmitters and also measure current. These calibrators often feature time saving technology, specialist graphics using digital interfaces and micro-processor based electronics.

How much current flows in each loop of a parallel circuit?

Determined by Ohm's law, which states that the current between 2 points through a conductor is directly proportionate to the voltage across those 2 points, divided by the resistance of the conductor. I = V/R. This is also the case for series and parallel circuits, however in parallel circuits the total current can be affected by the way the resistors have been connected, as well as their ohmic value. Current does divide up and there can be more current in one area over another nonetheless when all areas are added up the total amount is the same.

Supplied with

Test leads, crocodile clips, manual, holster, 707EX content control drawing and a 9V alkaline battery.

Specificaties
Kenmerk Waarde
Absolute Maximum Current Measurement 24mA
Calibrated RSCAL
Best Accuracy ±0.015 %
Resolution 0.001 mA
Battery Type 9 V
Battery Life 18 h
Power Source Battery
Dimensions 152 x 70 x 41mm
Weight 224g
Height 152mm
Length 41mm
Maximum Operating Temperature +55°C
Minimum Operating Temperature -10°C
Safety Category Voltage 30V
Width 70mm
Model Number p 707EX
Hazardous Area Certification ATEX
Safety Category Level CAT I
12 op voorraad - levertijd is 1 werkdag(en) plus 1 dag extra in verband met gekalibreerd artikel. Gekalibreerde producten kunnen niet worden geretourneerd.
Prijs Each
1.331,00
(excl. BTW)
1.610,51
(incl. BTW)
Aantal stuks
Per stuk
1 +
1.331,00 €
Related Products
With a smart graphic display and menu-driven interface, ...
Description:
With a smart graphic display and menu-driven interface, the Druck UPS III IS loop calibrator is one of Druck's more advanced, time-saving calibration tools. Producing maximum results with a compact design, the UPS III IS forms part of an essential ...
Easy to use current, voltage and loop calibratorSource ...
Description:
Easy to use current, voltage and loop calibratorSource & measure in 3 current & 3 volt ranges Transmitter/simulator sink functionHigh accuracy 0.02%A large easy to read 4.5 digit LCD which auto-ranges, 0.005% of range resolutionOutput functions include steps, ramps and ...
Small but mighty, Druck's UPS III loop calibrator ...
Description:
Small but mighty, Druck's UPS III loop calibrator offers maximum results with a compact design. The calibrator forms part of an essential toolbox that one may need for calibration and troubleshooting, instrument maintenance and valve set-up. Druck's loop calibrator offers ...
Loop-mates designed for the calibration, testing and measurement ...
Description:
Loop-mates designed for the calibration, testing and measurement of process loops are pocket sized units that boast a simplistic operation, no complicated selections just grab and go.Loop-Mate 1 (537-2580) - Simulator which acts as a source in providing loop signals, ...