Druck UPS-III Current Loop Calibrator 24mA UKAS Calibration

  • RS-stocknr. 449-8798
  • Fabrikantnummer UPS-III
  • Fabrikant Druck
Datasheets
Wetgeving en conformiteit
N.v.t.
Land van herkomst: GB
Productomschrijving

Druck Loop Calibrator - UPS III

Small but mighty, Druck's UPS III loop calibrator offers maximum results with a compact design. The calibrator forms part of an essential toolbox that one may need for calibration and troubleshooting, instrument maintenance and valve set-up. Druck's loop calibrator offers a wealth of time-saving features, all made possible through the advanced microprocessor-based electronics and large menu-driven graphics display.

Features & Benefits

• HART compatible with internal loop resistor
• Weighing just 275g (9.7 oz), and it's dimensional measurements are L129 x W77 x D24 mm - fitting comfortably in a shirt pocket
• Rugged, hardwearing and compact design
• The graphic display with a menu-driven interface has been designed to be super user-friendly
• The internal 0 to 24 V (volts) loop supply is available in both measure and source modes, this is essential during plant shutdowns
• Step, span check and value check can be easily carried out through linearity tests and zero/span adjustments
• The calibrator offers single-handed loop testing, valve set-up and slow rate checks through adjustable rates (1-599 secs)
• The continuity and switch test facility reduce DMM dependence when fault finding, checking loop integrity and testing switches
• Adjustable display contrast and resolution
• Battery voltage and low battery indicator
• The primary reading is shown in mA (milliamp) or %, as linear or square root (flow)
• Auto switch off can be enabled or disabled, when the auto power down is enabled it will power down 30 minutes ager the last key was pressed
• The measurement generation of 0 - 24mA DC
• Predefined values for quick testing of linear loops, flow loops and the control of valves
• Has an operating temperature of 14°F to 122°F (-10°C to 50°C)
• The power supply of this loop calibrator is through 4 x 1.5 V (volts) AA size alkaline batteries
• Electrical terminals are gold plated, 4 mm sockets

Looking for some accessories?

• A universal mains input adapter as an alternative power for the UPS III – 434-7038
• Carry case – 434-7022
• Protective nitrile rubber over-boot, ensuring an extra layer of protection for the device – 434-7016

What's included with the kit?

• A handy user manual
• Set of cables/wires
• Batteries - 4 x 1.5 V AA alkaline
• Calibration certificate as standard

Specificaties
Kenmerk Waarde
Calibrated UKAS
Absolute Maximum Current Measurement 24mA
Best Accuracy ±0.01 %
Resolution 0.001 mA
Battery Type AA
Battery Life 75 h
Power Source Battery
Dimensions 24 x 77 x 129mm
Weight 275g
Height 129mm
Length 24mm
Maximum Operating Temperature +50°C
Minimum Operating Temperature -10°C
Width 77mm
Model Number p UPS-III
13 op voorraad - levertijd is 1 werkdag(en) plus 1 dag extra in verband met gekalibreerd artikel. Gekalibreerde producten kunnen niet worden geretourneerd.
Prijs Each
Was 918,46 €
867,00
(excl. BTW)
1.049,07
(incl. BTW)
Aantal stuks
Per stuk
1 +
867,00 €
Related Products
Easy to use current, voltage and loop calibratorSource ...
Description:
Easy to use current, voltage and loop calibratorSource & measure in 3 current & 3 volt ranges Transmitter/simulator sink functionHigh accuracy 0.02%A large easy to read 4.5 digit LCD which auto-ranges, 0.005% of range resolutionOutput functions include steps, ramps and ...
Extremely fast and easy to use, Fluke offers ...
Description:
Extremely fast and easy to use, Fluke offers a push-button and knob-base current loop calibrator. Designed for high performance one handed operation, calibration, maintenance and repairs of current loops, assisting users in working more accurately and efficiently. A clear large ...
Loop-mates designed for the calibration, testing and measurement ...
Description:
Loop-mates designed for the calibration, testing and measurement of process loops are pocket sized units that boast a simplistic operation, no complicated selections just grab and go.Loop-Mate 1 (537-2580) - Simulator which acts as a source in providing loop signals, ...
Combining the functionality of a current loop calibrator ...
Description:
Combining the functionality of a current loop calibrator with the power of a digital multimeter, Fluke's 789 also has the wireless capabilities of Fluke Connect with the IR3000FC module. Featuring a larger display than the Fluke 787B, it has 2 ...