RS PRO Plier Crimping Tool for Insulated Terminal

Datasheets
Wetgeving en conformiteit
N.v.t.
Land van herkomst: TW
Productomschrijving

RS Pro Hand Crimping Tool

RS Pro offers a 4 in 1 application crimp tool, a quality hand tool for crimping, wire stripping, cutting bolts and ignition terminals. This hand tool will not only save you time but your work will be presented in a professional manner which makes it the ideal choice for professionals and DIY enthusiast. The crimp application of the tool is simple it connects 2 pieces of material together by compression typically a wire and a connector terminal. The wire stripper application is a joy to use, just slip the wire through the appropriate channel, squeeze and slide the outer sheath off to expose the wire. A great feature of this crimp tool is the capacity to make your own ignition cables like (motorbike as an example), again it’s simply case of preparing the wire, attaching the terminal and squeezing to make the union. And finally a bolt cutter, this application is sometimes overlooked but if you need to trim a bolt simply screw the bolt into the hole and squeeze handle for a precise cut.
So, the RS pro crimp tool has multiple uses and gives you professional results each time, an excellent addition to any toolbox.

Features and Benefits

• Crimp capacity: 1.75 to 6 mm
• Wire stripping capacity: 0.75 to 6 mm
• Compatible with the RS range of red, yellow, and blue terminals
• Bolt cutter: M2.6 to M5
• Insulated - comfortable hand grip
• Provides two-hand grip in the final phase of crimping, increasing comfort and productivity

Typical Applications:
• Maintenance & repair
• Electrical Installations
• Cable assemblies

Note: Unsuitable for un-insulated terminals.

FAQ:
How easy are they to use?
They are very easy to use with either hand, there is no formal training required for this crimper.

How do you maintain the product?
• Movable parts should be regularly lubricated.
• Lubrication* is recommended at least every 10,000 cycles whenever the tool is exposed to contaminants.

The Importance of a High-Quality Crimp
When a crimping tool is used on a terminal, two crimps take place at the same time. One is the electrical connection between the conductor and terminal. The other is the insulation crimp which provides strain relief against vibration and tension. It is important that the electrical connection is gas-tight without any voids between the wire strands and the terminal. If there any voids present, then corrosion can occur causing resistance and excessive heat which damages the electrical connection. Using a good quality crimping tool will ensure that a full, gas-tight crimp is produced preventing future deterioration of the electrical connection and insulation breakage.

Note

Unsuitable for un-insulated terminals, or mini yellow size.

RS Insulated Crimping Tool

All RS crimp tools are compatible with the RS range of red, yellow, and blue terminals.

Range Compatibility/Tooling Detail

Tool will also cut and strip wire, cut small diameter bolts and crimp ignition terminals

Specificaties
Kenmerk Waarde
Crimp Tool Type Plier
Crimp Connector Type Insulated Terminal
Overall Length 206 mm
6 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
148 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
9,25
(excl. BTW)
11,19
(incl. BTW)
Aantal stuks
Per stuk
1 +
9,25 €
Related Products
This selection of two RS Pro professional ratchet ...
Description:
This selection of two RS Pro professional ratchet action crimp tools has been designed with quality in mind and manufactured from the high-quality steel that guarantees durability and long life operation. Both Crimp Tools are suitable for terminating the BNC, ...
RS PRO 8-indent crimp tool designed around MIL-C-2250/2 ...
Description:
RS PRO 8-indent crimp tool designed around MIL-C-2250/2 (setting 3 upwards). Lightweight and easy to operate, the positioners set the crimp contact barrel at the correct height for crimping. This professional hand tool offers wire range size of 26 AWG ...
RS Pro professional universal crimp tool frame for ...
Description:
RS Pro professional universal crimp tool frame for use in combination with a die set to create high-quality crimp terminals. This hand tool is made from durable hard wearing steel with a black oxide finish. Suited for applications where environmental ...
RS PRO range of crimp tools for crimping ...
Description:
RS PRO range of crimp tools for crimping insulated connectors and non-insulated ferrules. These tools are compact and lightweight, with ergonomically shaped handles making them very comfortable to use. These crimp tools have a ratchet mechanism with emergency release ensuring ...