RS PRO 16 Way Positioner

Datasheets
Wetgeving en conformiteit
N.v.t.
Land van herkomst: GB
Productomschrijving

Crimp Tool, 8 Indent

An 8 indent crimp tool designed around MIL-C-22520/2 (settings 3 upwards). The correct positioner is located in the tool to act as a stop for the crimp terminal. This ensures the crimp barrel is at the correct height for crimping. Crimping instructions are included with each positioner.

ITT TNM Shielded

The TNM connector range builds on the popular Trident and Neptune ranges from ITT Cannon. They feature full metal construction giving high reliability and durability.

RF shielding inherent in the full metal construction
Backshells enable cable braid termination so meeting EMC requirements
Signal versions have the same planform & contact arrangements as the QM range so upgrading and interchangeability can be achieved
Includes a rear rubber seal that enables IP67 rating to be maintained if only some contacts are used. The rubber seal can be discarded if a backshell is to be used. Both are rated to IP67
Cable, chassis and jam nut configurations available in standard and reversed formats
One, two or three part crimp contacts, also solder cup and PCB terminating contacts available for signal transfer. Power contacts are only required for power/signal connector types

Specificaties
Kenmerk Waarde
Type Positioner
Series QM/TNM
Number of Contacts 16
19 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
63,18
(excl. BTW)
76,45
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
63,18 €
5 - 9
61,34 €
10 - 24
60,13 €
25 - 49
58,26 €
50 +
53,87 €
Related Products
Professional cable knife constructed from high Carbon Steel ...
Description:
Professional cable knife constructed from high Carbon Steel for the cutting and stripping of cables and cable jackets. iF Product Design Award Winner 2009Strips cable up to 50 mm in diameter and wire from AWG 10-20Vacuum hardened to 58-60 HRC ...
The crimp tool now has a rotating locator ...
Description:
The crimp tool now has a rotating locator as part of the tool to cover use with Han D, DD, E and HD range of crimps. The locators (not illustrated) are for use with the previous version of this tool ...
A range of Lemo M series contact positioners ...
Description:
A range of Lemo M series contact positioners essential when building complete connector assemblies, used in conjunction with the appropriate crimp tool these positioners ensure the contacts are correctly and securely crimped prior to assembly into the relevant Lemo M ...
Bulgin Buccaneer 6000 series tooling and accessories suitable ...
Description:
Bulgin Buccaneer 6000 series tooling and accessories suitable for use with the 6000 series of metal and plastic circular connectors, including a gland pack covering 4-10mm diameter cables, various contact removal tools for differing connector contacts, screening clamp and crimp ...