RS PRO Insulated Ring Terminal, M5 Stud Size, 0.5mm² to 1.5mm² Wire Size, Red

Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: TW
Productomschrijving

RS PRO Vinyl Insulated Crimp Ring Terminals

From RS PRO a high-quality insulated crimp ring terminal, also known as a ring connector or cable lug. Ring crimp terminals are used for connecting an electrical cable or wire to a stud or a post on an electrical component such as a battery terminal. This ring terminal is made from highly conductive copper and then tin plated for maximum electrical conductivity and corrosion resistance. A colour coded vinyl insulation provides protection to the terminal and aids quick identification of the terminal size. Once correctly crimped onto a wire or cable this ring terminal will provide a secure and reliable electrical connection.

Features and Benefits

• Copper body material for high conductivity and easy crimping
• Tin plating for resistance to corrosion, added strength and excellent conductivity
• Vinyl insulation for electrical insulation and terminal protection
• Colour coded insulation for easy identification of terminal size
• Expanded insulation entry for easy wire insertion
• Maximum operating temperature of 150°C

Applications

These insulated crimp ring wire connectors are used in a wide range of industries for connecting wires to electrical components. Applications include wiring in industrial control systems and industrial machines, automotive applications, communication equipment, power supplies and domestic appliances.

Selecting the Correct Ring Terminal Size

When selecting the right ring terminal for your application, you should consider the following:

• The wire gauge mm (metric) or AWG (American Wire Gauge) of the wire or cable you are using
• The stud size to which you will be connecting the ring terminal.
• The inner diameter of the ring terminal

How to Crimp a Ring Terminal

Firstly, select the correct sized ring terminal. Strip the end of the wire and cut it to the same length as terminal. Insert the wire into the terminal barrel making sure no bare wire is visible. The crimp terminal is then ready to be crimped on to the end of the wire. When crimping a wire terminal, pliers or a ratchet can be used but, for a better quality crimp, it is better to use a ratchet crimping tool. A ratchet crimping tool is preferable as the handles will remain locked until a full crimp cycle is completed which will prevent partial crimps. Insert the barrel of the ring terminal into the appropriate crimping section (indicated by sizes marked on the tool). Squeeze the tool handles together until the ratchet releases. The crimped ring terminal can now be placed over the stud or post and secured in place with a nut or by soldering.

Suitable Crimp Tool

For suitable ratchet crimp tool please see RS PRO stock number 125-1964

Suitable Crimp Tool

For suitable crimp tool see stock number 533-279

RS Pro Range

Specificaties
Kenmerk Waarde
Insulation Insulated
Insulation Material PVC
Inner Ring Diameter 5.3mm
Outer Ring Diameter 8mm
Minimum Wire Size mm² 0.5mm²
Maximum Wire Size mm² 1.5mm²
Minimum Wire Size AWG 22AWG
Maximum Wire Size AWG 16AWG
Stud Size M5
Colour Red
Contact Material Copper
Contact Plating Tin
Thickness 0.8mm
Overall Length 26.7mm
8600 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
125800 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each (In a Pack of 100)
0,066
(excl. BTW)
0,08
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
100 - 400
0,066 €
6,60 €
500 - 2400
0,06 €
6,00 €
2500 - 4900
0,053 €
5,30 €
5000 - 9900
0,017 €
1,70 €
10000 +
0,017 €
1,70 €
*prijsindicatie
Related Products
WA-CLUG tubular ring terminals or cable lugs made ...
Description:
WA-CLUG tubular ring terminals or cable lugs made from copper alloy with a tin plating. These tubular ring termnals are available in various sizes and are suitable for use in a wide variety of cable applications.
Tubular terminals without inspection holeMaterial: E-Cu tubingElectro tin-plated ...
Description:
Tubular terminals without inspection holeMaterial: E-Cu tubingElectro tin-plated surfaceFor suitable tools, see stock no. 398-3043 or 398-2270.
Hirschmann Test and Measurement PKNI10 B, CAT I ...
Description:
Hirschmann Test and Measurement PKNI10 B, CAT I 4mm gold plated chassis mount test sockets with pole clamp-claw edge, captive-insulated head and insulating ring. Incorporates a 4mm socket and an M6 ´ 0.75mm threaded nickel plated brass bolt with 2.6mm ...