TE Connectivity, PLASTI-GRIP Insulated, Tin Crimp Pin Connector, 0.25mm² to 1.6mm², 22AWG to 16AWG, 1.8mm Pin Diameter,

Datasheets
Wetgeving en conformiteit
Conform
Productomschrijving

TE Connectivity PLASTI-GRIP Wire Pin Crimp Terminals

PLASTI-GRIP wire pin crimp terminals made of high conductivity tin plated copper with an expanded high dielectric strength 94V-0 rated vinyl insulation sleeve. The inner barrel of these PLASTI-GRIP crimp pin terminals is serrated in order to provide maximum electrical contact and tensile strength after crimping. The funnelled entry on the wire barrel enables the stripped wire to be inserted more easily.

Red 0.25 - 1.6 mm²
Blue 1.0 - 2.6 mm²
Yellow 2.7 - 6.6 mm²

Note

Not for use with double wire

TE Connectivity Plasti-Grip Terminals

Specificaties
Kenmerk Waarde
Series PLASTI-GRIP
Insulation Insulated
Insulation Material Vinyl
Minimum Wire Size mm² 0.25mm²
Overall Length 23.82mm
Maximum Wire Size mm² 1.6mm²
Minimum Wire Size AWG 22AWG
Maximum Wire Size AWG 16AWG
Pin Diameter 1.8mm
Colour Red
Contact Plating Tin
Tijdelijk niet op voorraad – nieuwe voorraad verwacht op 06/04/2021, met een levertijd van 1 werkdag.
Prijs Each (In a Pack of 100)
Was 0,20 €
0,144
(excl. BTW)
0,174
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
100 +
0,144 €
14,40 €
*prijsindicatie
Verpakkingsopties
Related Products
Copper alloy with gold over nickel plating.,The PCB ...
Description:
Copper alloy with gold over nickel plating.,The PCB pin contacts protrude 5.6mm from the back of the connector to allow direct connection to a PCB. Plugs and receptacle may be fitted with either crimp pins or socketsIntegral cable clampBayonet locking ...
REDCUBE crimp pin cable connectors that are designed ...
Description:
REDCUBE crimp pin cable connectors that are designed to plug into the REDCUBE direct PCB plug terminals. These crimp connectors are made from copper alloy with a tin plating and are available with different current ratings and wire size ranges. ...
C100-51220-2. Material for disconnects : Tin-plated phosphorous bronzeMaterial ...
Description:
C100-51220-2. Material for disconnects : Tin-plated phosphorous bronzeMaterial for pin terminals : Tin-plated copperInsulation according to EN 45545Comply with NFF 00363Suitable for copper cables according NFF or EN standardsSNCF drawing : 10-5050-310RATP drawing : MR-3-52965.
SOLISTRAND wire pin crimp terminals designed to terminate ...
Description:
SOLISTRAND wire pin crimp terminals designed to terminate solid and stranded wire and irregular shaped conductors. The robust design of these SOLISTRAND wire pin terminals enables them to maintain their superior performance characteristics even when used in the most challenging ...