Molex Insulated Tin Plated Direct Solder Crimp Terminal, 0.2mm² to 0.3mm², 24AWG to 22AWG

  • RS-stocknr. 167-6241
  • Fabrikantnummer 172677-0100
  • Fabrikant Molex
Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: US
Productomschrijving

Molex SolderRight Right-Angle Direct Solder Crimp Terminals

SolderRight™ right-angle direct solder board-in crimp terminals provide an alternative to soldering bare wires onto PCB or using two piece connectors by enabling low profile right angle wire connections to be made direct to a PCB. These SolderRight™ direct-solder terminals have twin solder pins that provide stability for solder processing, allow redundant current paths and provide wire strain relief. Typical applications for these SolderRight™ direct-solder crimp terminals include those where there are tight packaging restraints such as vehicle electronics, laptop computers, handheld devices, power supplies, consumer appliances etc.

Specificaties
Kenmerk Waarde
Series Number 172677
Insulation Insulated
Minimum Wire Size mm² 0.2mm²
Maximum Wire Size mm² 0.3mm²
Overall Length 8.2mm
Minimum Wire Size AWG 24AWG
Maximum Wire Size AWG 22AWG
Contact Plating Tin
Contact Material Brass
tijdelijk niet op voorraad – nieuwe voorraad verwacht op 23/09/2020, met een levertijd van 2 à 3 werkdagen.
Prijs 1 Reel of 16000
Was 2.343,65 €
1.958,40
(excl. BTW)
2.369,66
(incl. BTW)
Reel(s)
Per reel
Per stuk*
1 +
1.958,40 €
0,122 €
*prijsindicatie