RS PRO Red Insulated Female Spade Connector, Piggyback Terminal, 6.35 x 0.8mm Tab Size, 0.5mm² to 1.5mm²
- RS-stocknr.:
- 613-9918
- Fabrikant:
- RS PRO
- RS-stocknr.:
- 613-9918
- Fabrikant:
- RS PRO
Wetgeving en conformiteit
- Land van herkomst:
- TW
Productomschrijving
RS PRO Red Insulated Spade Connector, 6.35 x 0.8 mm Tab Size, 0.5 mm² to 1.5 mm²
Use this RS PRO spade connector to connect single wires to relays or components. One of the most popular types of wire connector, its spade design allows terminals to be connected and disconnected quickly and easily while the bolt is still partially screwed in.
Designed for crimping termination, simply deform the connector around a wire using pliers. This method allows for easy, safe and solder-free joints that are mechanically strong. A wire can be easily slotted into the component once the other wire has been crimped on the opposite end. Tin-plated brass contacts resist damage. It also has a rifled barrel, giving it improved contact and tensile strength.
As part of the RS PRO range, this spade connector has been stringently tested for safety and quality. Most commonly found in automotive electronics, it's also commonly used in domestic appliances such as dishwashers.
Designed for crimping termination, simply deform the connector around a wire using pliers. This method allows for easy, safe and solder-free joints that are mechanically strong. A wire can be easily slotted into the component once the other wire has been crimped on the opposite end. Tin-plated brass contacts resist damage. It also has a rifled barrel, giving it improved contact and tensile strength.
As part of the RS PRO range, this spade connector has been stringently tested for safety and quality. Most commonly found in automotive electronics, it's also commonly used in domestic appliances such as dishwashers.
Features and Benefits
Red spade connector
Wire size range of 0.5 mm² to 1.5 mm², 22 AWG to 16 AWG
Tab size of 0.8 mm x 6.35 mm
Unshrouded
Crimp termination method
Polycarbonate (PC) insulation material
Brass contacts, tin-plated finish
Length of 23 mm
Wire size range of 0.5 mm² to 1.5 mm², 22 AWG to 16 AWG
Tab size of 0.8 mm x 6.35 mm
Unshrouded
Crimp termination method
Polycarbonate (PC) insulation material
Brass contacts, tin-plated finish
Length of 23 mm
RS PRO
RS PRO is our own brand range and brings you a wide range of high-quality, great value products offering you more choice. Trusted by engineers all over the world, every part of every RS PRO product has been rigorously tested against demanding industry standards theyre only given the RS PRO Seal of Approval if were confident of their exceptional quality, which means you can be confident too.
Small Pack Size
Per Unit, RS stock no: 613-9918
Large Pack Size
RS stock no: 270-7611
Approvals
UL (E125401)
Specificaties
Kenmerk | Waarde |
---|---|
Type | Piggyback Terminal |
Gender | Female |
Minimum Wire Size mm² | 0.5mm² |
Maximum Wire Size mm² | 1.5mm² |
Tab Size | 6.35 x 0.8mm |
Tab Width | 6.35mm |
Tab Thickness | 0.8mm |
Insulation | Insulated |
Maximum Wire Size AWG | 16AWG |
Minimum Wire Size AWG | 22AWG |
Termination Method | Crimp |
Colour | Red |
Contact Material | Brass |
Insulation Material | PC |
Overall Length | 23mm |
Shrouded/Unshrouded | Unshrouded |