MH Connectors MHD Series 2.77mm Pitch Straight Crimp D-Sub Connector Housing, Plug, 37 Pin

Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: TW
Productomschrijving

D-Sub Connector Plugs and Socket Shells

Suitable for crimp or solder termination contacts, see stock no's 719-5824 and 719-5833 typically
These connector shells offer the possibility of assembly and re-assembly with either crimp or solder contacts
High quality, crimp and poke or solder and poke connectors in standard case sizes
Tinned/dimpled shells for grounding continuity

Note

For suitable hole cutters, refer to ’D’ connector cutters (e.g. stock no. 477-8690)

Specificaties
Kenmerk Waarde
Number of Contacts 37
Gender Male
Body Orientation Straight
Housing Material Steel
Contact Plating Gold over Nickel
Series MHD
Pitch 2.77mm
Contact Material Copper Alloy
Current Rating 5A
Dimensions 69.32 x 5.97 x 12.55mm
Width 5.97mm
Length 69.32mm
Depth 12.55mm
Maximum Operating Temperature +105°C
Minimum Operating Temperature -55°C
Voltage Rating 250 V ac
60 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
900 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each (In a Pack of 5)
1,534
(excl. BTW)
1,856
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
5 - 120
1,534 €
7,67 €
125 - 495
1,376 €
6,88 €
500 - 1245
1,306 €
6,53 €
1250 - 2495
1,154 €
5,77 €
2500 +
1,076 €
5,38 €
*prijsindicatie
Related Products
2.54mm SL series Terminal Position Assurance (TPA) components ...
Description:
2.54mm SL series Terminal Position Assurance (TPA) components for use with 70107 series SL wire to wire crimp plug housings with TPA slots. These TPA components provide increased terminal pull-out force and reduce the risk of terminal back out in ...
These 8656 Series D-Subminiature Connectors have removable crimp ...
Description:
These 8656 Series D-Subminiature Connectors have removable crimp contacts (supplied separately) and will accept the standard range of FCI accessories such as hoods and locking devices. Range of Sub-D connectors for crimp connection.Indents on male connectors.Products are UL certified.Bulk boxes ...
For suitable hole cutters, refer to 'D' connector ...
Description:
For suitable hole cutters, refer to 'D' connector cutters (e.g. stock no. 477-8690). Rear entry release crimp contactsPlugs/shells tinned plated for shielding continuityRatchet controlled tool available separately.
"D" connectors with crimp snap-in contacts. Closed entry ...
Description:
"D" connectors with crimp snap-in contacts. Closed entry socket insulators correct misaligned pins during engagement.,Socket shells accept socket contacts and plug shells accept pin contacts. Suitable crimp tool stock no. 458-904 and extraction tool stock no. 469-500.