MH Connectors MHD Series 2.77mm Pitch Straight Crimp D-Sub Connector Housing, Plug, 9 Pin

Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: TW
Productomschrijving

D-Sub Connector Plugs and Socket Shells

Suitable for crimp or solder termination contacts, see stock no's 719-5824 and 719-5833 typically
These connector shells offer the possibility of assembly and re-assembly with either crimp or solder contacts
High quality, crimp and poke or solder and poke connectors in standard case sizes
Tinned/dimpled shells for grounding continuity

Note

For suitable hole cutters, refer to ’D’ connector cutters (e.g. stock no. 477-8690)

Specificaties
Kenmerk Waarde
Number of Contacts 9
Gender Male
Body Orientation Straight
Housing Material Steel
Contact Plating Gold over Nickel
Series MHD
Pitch 2.77mm
Contact Material Copper Alloy
Current Rating 5A
Dimensions 30.81 x 5.97 x 12.55mm
Depth 12.55mm
Length 30.81mm
Width 5.97mm
Voltage Rating 250 V ac
Maximum Operating Temperature +105°C
Minimum Operating Temperature -55°C
120 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
430 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each (In a Pack of 5)
1,038
(excl. BTW)
1,256
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
5 - 120
1,038 €
5,19 €
125 - 495
0,936 €
4,68 €
500 - 1245
0,886 €
4,43 €
1250 - 2495
0,78 €
3,90 €
2500 +
0,73 €
3,65 €
*prijsindicatie
Related Products
2.54mm SL series Terminal Position Assurance (TPA) components ...
Description:
2.54mm SL series Terminal Position Assurance (TPA) components for use with 70107 series SL wire to wire crimp plug housings with TPA slots. These TPA components provide increased terminal pull-out force and reduce the risk of terminal back out in ...
These 8656 Series D-Subminiature Connectors have removable crimp ...
Description:
These 8656 Series D-Subminiature Connectors have removable crimp contacts (supplied separately) and will accept the standard range of FCI accessories such as hoods and locking devices. Range of Sub-D connectors for crimp connection.Indents on male connectors.Products are UL certified.Bulk boxes ...
For suitable hole cutters, refer to 'D' connector ...
Description:
For suitable hole cutters, refer to 'D' connector cutters (e.g. stock no. 477-8690). Rear entry release crimp contactsPlugs/shells tinned plated for shielding continuityRatchet controlled tool available separately.
"D" connectors with crimp snap-in contacts. Closed entry ...
Description:
"D" connectors with crimp snap-in contacts. Closed entry socket insulators correct misaligned pins during engagement.,Socket shells accept socket contacts and plug shells accept pin contacts. Suitable crimp tool stock no. 458-904 and extraction tool stock no. 469-500.