Molex SL Series 7 Way Crimp Housing for use with SL™ Modular Connectors

  • RS-stocknr. 908-1067
  • Fabrikantnummer 73838-0007
  • Fabrikant Molex
Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: US
Productomschrijving

Molex 2.54mm SL Series Terminal Position Assurance (TPA)

2.54mm SL series Terminal Position Assurance (TPA) components for use with 70107 series SL wire to wire crimp plug housings with TPA slots. These TPA components provide increased terminal pull-out force and reduce the risk of terminal back out in high vibration environments.

2.54mm Molex C-Grid/SL Series

Specificaties
Kenmerk Waarde
Accessory Type Crimp Housing
For Use With SL™ Modular Connectors
Number of Ways 7
Series Number 73838
Series SL
tijdelijk niet op voorraad – nieuwe voorraad verwacht op 12/10/2020, met een levertijd van 2 à 3 werkdagen.
Prijs Each (In a Pack of 10)
0,285
(excl. BTW)
0,345
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
10 - 70
0,285 €
2,85 €
80 - 370
0,271 €
2,71 €
380 - 740
0,247 €
2,47 €
750 +
0,209 €
2,09 €
*prijsindicatie
Verpakkingsopties
Related Products
This range of Mini-Latch Housings are used to ...
Description:
This range of Mini-Latch Housings are used to hold individual Mini-PV Contacts purchased separately, see stock number 771-0127 typical. The Mini-Latch Housings have a pitch and row to row spacing of 2.54 mm.
These Dubox Housings are for use with the ...
Description:
These Dubox Housings are for use with the Dubox Receptacle Crimp-to-Wire Contact.The Dubox Housings are stackable end-to-end and allow the contacts to be removed for repairs. When mated to Dubox shrouded headers the Dubox Housing design gives passive latching with ...
This range of 2.54 mm pitch TE Connectivity ...
Description:
This range of 2.54 mm pitch TE Connectivity AMPMODU™ Locking Clip Receptacle Housings have Self-retaining contacts to provide permanent connection integrity with quick connect and disconnect for fast, easy installation with no additional locking hardware required. Mates with 0.64mm2 postsSingle- ...
2.54mm cable mount AMPMODU IV crimp receptacle housings ...
Description:
2.54mm cable mount AMPMODU IV crimp receptacle housings with a single row in-line or double row contact configuration that mate with AMPMODU MOD II .025 inch PCB header connectors. These AMPMODU IV crimp receptacle housings have polarization to ensure accurate ...