TE Connectivity 26 Way IDC Strain Relief for use with AMPLATCH Novo Series, Ribbon Cable Connection

Datasheets
Wetgeving en conformiteit
Conform
Productomschrijving

TE Connectivity Novo Series IDC Ribbon Cable Connectors

TE’s Novo series IDC ribbon cable connectors are designed to work hand in hand with compatible flat ribbon cables to create a cable assembly. With military and centre polarization, the Novo series is to be used with wire to board IDC ribbon cable connectors with centre and military polarized centres and a 2.54 x 2.54 mating grid for 1.27mm pitch ribbon cable. These AMP-LATCH Novo IDC ribbon cable connectors are made from UL 94V-0 thermoplastic with two rows of IDC duplex plated tuning fork style contacts accepting a wire size of 28-26 AWG. A cover is supplied with these AMP-LATCH Novo housing assemblies and optional strain reliefs are available.
IDC is short for Insulation-Displacement Connector. These electrical connectors are designed for ribbon cables and telecommunications applications. They are also referred to as insulation-piercing contacts (IPCs).

Features
• Connector System- Wire to Board
• Tuning fork contact offers a military approved design, at an economical cost
• Choice of duplex gold plating on contact mating area
• Selected 10 thru 64-position configurations available
• Contact design provides uniform latching of contacts and housing with connector cover

Standards

DIN 41651, DIN EN 60352-3//4

Specificaties
Kenmerk Waarde
Accessory Type IDC Strain Relief
For Use With AMPLATCH Novo Series
Cable Type Ribbon
Number of Ways 26
570 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
1090 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each (In a Pack of 10)
0,284
(excl. BTW)
0,344
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
10 - 240
0,284 €
2,84 €
250 - 990
0,196 €
1,96 €
1000 - 1990
0,137 €
1,37 €
2000 - 4990
0,13 €
1,30 €
5000 +
0,124 €
1,24 €
*prijsindicatie
Related Products
Universal MATE-N-LOK plug or cap housing strain reliefs ...
Description:
Universal MATE-N-LOK plug or cap housing strain reliefs and cap housing adaptors. The cap housing adaptors secure the cap housing strain reliefs to the housings to prevent the strain relief halves from “drawing in” when the screws are being torqued ...
These MR Strain Relief Housings require one No. ...
Description:
These MR Strain Relief Housings require one No. 6 Panhead Type B self-tapping screw 9.5 mm (0.375 inch) long similar to stock number 482-8076 . Flammability Rating is UL 94V-0 for these MR Strain Relief Housings.Stock numbers 820-8340, 820-8362 and ...
These connectors provide fast reliable mass termination to ...
Description:
These connectors provide fast reliable mass termination to Speedbloc® ribbon cable without the need to separate individual wires before assembly. No cable stripping, soldering or expensive tooling is requiredFully compatible with conventional D connectors and accepts all standard locking systemsLow ...
AMPLIMITE HDF-20 series low profile metal shell IDC ...
Description:
AMPLIMITE HDF-20 series low profile metal shell IDC d-sub connectors for flat ribbon cable. These AMPLIMITE HDF-20 series IDC d-sub ribbon cable connectors have pre-assembled black 94V-0 rated thermoplastic housings and covers with a tin plated steel front shell and ...