Hirose, DF3 Female Crimp Terminal Contact 24AWG DF3-2428SCF

  • RS-stocknr. 175-0652
  • Fabrikantnummer DF3-2428SCF
  • Fabrikant Hirose
Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: JP
Productomschrijving

Low profile design with the mounting height of 6.8mm
Achieves the multi-harness by the full automatic ID machine in combination with the DF11 series ID type.
Crimp Socket: Low profile design with mounting height 7.5mm.
Provide the contact crimping area with the sufficient space, and secures the stable crimping operation.
The board can be connected horizontally or vertically in combination with the straight header with the right angle header.
For horizontal connection, the board to board size is the low profile of 6.6mm.
Compatibility with the in-line plug allows the receptacle to set the board side to the receptacle and the cable side to the plug in the board to cable connection.
The board pre-fixed kink is treated with the post pin.
The style employs a scoop-proof and sturborn box type.
This SMT header is equipped with the metal tab to prevent peeling in the solder joint area.

Specificaties
Kenmerk Waarde
Gender Female
For Use With Discrete Wire Connectors
Series DF3
Maximum Wire Size mm² 0.2mm²
Termination Method Crimp
Contact Plating Tin
Minimum Wire Size AWG 28AWG
Contact Material Phosphor Bronze
Maximum Wire Size AWG 24AWG
Maximum Contact Resistance 30mΩ
Minimum Operating Temperature -35°C
Maximum Operating Temperature +85°C
3300 op voorraad - levertijd is 1 werkdag(en).
Prijs Each (In a Pack of 100)
0,026
(excl. BTW)
0,031
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
100 - 400
0,026 €
2,60 €
500 - 900
0,023 €
2,30 €
1000 - 2400
0,02 €
2,00 €
2500 - 4900
0,019 €
1,90 €
5000 +
0,017 €
1,70 €
*prijsindicatie
Verpakkingsopties
Related Products
PCB connector contacts are one of the key ...
Description:
PCB connector contacts are one of the key component parts of printed circuit boards. They are used to complete the circuit by conducting electrical current from the connector to the PCB. The connector will often be contained within a PCB ...
Crimp contacts for use in the 1.5 mm ...
Description:
Crimp contacts for use in the 1.5 mm Mini-CT crimp receptacle housings. These Mini-CT crimp socket contacts have a dual beam design for increased electrical reliability and accept a wire size range of 28 AWG to 24 AWG.
PUD series crimp socket contacts for use in ...
Description:
PUD series crimp socket contacts for use in the PUD series 2.00mm crimp socket housings. These PUD series crimp socket contacts have a highly reliable leaf spring structure to prevent deformation and center dimples to ensure continuity current under vibration.Stock ...
The ZH connectors are very small with a ...
Description:
The ZH connectors are very small with a mounting height of 5.6 mm (.220") and a thickness of only 3.5 mm (.138"). Contact retention lances on the housing make insertion easier, while the dimple at the centre of the contact ...