3M 952 T-Tap Wire Splice Connector, Blue, Insulated, Tin Plated 0.8 → 2 mm², 18 → 14 AWG

  • RS-stocknr. 837-7046
  • Fabrikantnummer 952X
  • Fabrikant 3M
Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: US
Productomschrijving

3M Scotchlok™ Female QuickSlide Disconnect

These T-Tap units have been designed to be able to electrically tap into a wire in mid-span without the need to cut or strip the wire. The female connector then mates with a male tab offering a re-usable quick connect wiring termination. With a high temperature rating and various sizes available these units are suitable for many possible applications.

Standards

UL and CSA

Specificaties
Kenmerk Waarde
Splice Type T-Tap
Wire Size 0.8 → 2 mm², 18 → 14 AWG
Overall Length 36.58mm
Insulation Insulated
Colour Blue
Insulation Material Nylon
Series 952
Shrouded/Unshrouded Shrouded
Contact Material Brass
Contact Plating Tin
Thickness 0.8mm
tijdelijk niet op voorraad – nieuwe voorraad verwacht op 15/11/2019, met een levertijd van 2 à 3 werkdagen.
Prijs Each (In a Pack of 50)
0,284
(excl. BTW)
0,344
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
50 +
0,284 €
14,20 €
*prijsindicatie
Related Products
Scotchlok UB2A tap splice connector used for tapping ...
Description:
Scotchlok UB2A tap splice connector used for tapping into another conductor without interrupting service. This Scotchlok UB2A tap splice features a factory-installed sealant to protect against corrosion and seal out moisture. Inside the Scotchlok UB2A splice connector are U shaped ...
Quick Splice IDC wire splice connectors made from ...
Description:
Quick Splice IDC wire splice connectors made from brass with a colour coded nylon insulation. These Quick Splices provide a simple and time saving wire connection method. The splice is simply placed over the existing wire, the additional wire inserted ...
PIDG (Pre-Insulated Diamond Grip) wire crimp splice terminals ...
Description:
PIDG (Pre-Insulated Diamond Grip) wire crimp splice terminals designed for uniform reliability in the most difficult circuit environments. These PIDG wire splice terminals consist of a precision-formed high conductivity copper body and barrel. The wire barrel is surrounded with both ...
MiniSeal high performance immersion-resistant crimp splices designed to ...
Description:
MiniSeal high performance immersion-resistant crimp splices designed to provide long-term performance and excellent reliability in challenging environments. These MiniSeal splices have a lightweight, low profile design for use in applications where the need for space saving and environmental sealing is ...