TE Connectivity Butt Wire Splice Connector, Blue, Insulated 18 → 16 AWG

Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: MX
Productomschrijving

TE Connectivity Cold Applied In-Line Splices

Cold applied in-line splices that require no heating for installation and provide environmental sealing against moisture using a flame retardant silicone based gel sealing system and electrical isolation using a polymer outer layer. The crimp barrels of these splices are made from tin plated copper and the transparent polyvinylidene fluoride insulation sleeves have a colour coded end cap at either end. These cold applied in-line splices provide protection and sealing on all conventional MIL spec and commercial wire insulation systems.
Stock number 782-4755 is for use with a wire range of 26, 24, 22 and 20 AWG and has red colour coded caps at either end
Stock number 782-4768 is for use with a wire range of 18 to16 AWG and has blue colour coded caps at either end
Stock number 782-4759 is for use with a wire range of 14 to12 AWG and has yellow colour coded caps at either end

Note

An AD-1381 or approved M22520/44-01 crimp tool must be used for proper installation of these devices.

Standards

Meets or exceeds the following: SAE-AMS-DTL-23053/8 (Insulation sleeve), SAE-AS81824/12
Under qualification for SAE AS81824 and AS81824/12

Splices

Specificaties
Kenmerk Waarde
Splice Type Butt
Wire Size 18 → 16 AWG
Overall Length 38.7mm
Insulation Insulated
Colour Blue
Op voorraad - levertijd 3 à 4 werkdagen.
Prijs Each
11,18
(excl. BTW)
13,53
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
11,18 €
5 - 24
10,62 €
25 - 74
10,08 €
75 +
9,51 €
Related Products
From RS PRO, a selection of insulated ferrules ...
Description:
From RS PRO, a selection of insulated ferrules or Butt Connectors designed for crimping electrical wires. The tube-shaped terminals act as a solderless cable joint allowing electrical current to flow safely from one wire to another. Professionally designed using high-quality ...
MiniSeal high performance immersion-resistant crimp splices designed to ...
Description:
MiniSeal high performance immersion-resistant crimp splices designed to provide long-term performance and excellent reliability in challenging environments. These MiniSeal splices have a lightweight, low profile design for use in applications where the need for space saving and environmental sealing is ...
Scotchlok UB2A tap splice connector used for tapping ...
Description:
Scotchlok UB2A tap splice connector used for tapping into another conductor without interrupting service. This Scotchlok UB2A tap splice features a factory-installed sealant to protect against corrosion and seal out moisture. Inside the Scotchlok UB2A splice connector are U shaped ...
Quick Splice IDC wire splice connectors made from ...
Description:
Quick Splice IDC wire splice connectors made from brass with a colour coded nylon insulation. These Quick Splices provide a simple and time saving wire connection method. The splice is simply placed over the existing wire, the additional wire inserted ...