TE Connectivity Butt Wire Splice Connector, Yellow, Insulated 14 12 AWG

Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: MX
Productomschrijving

TE Connectivity Cold Applied In-Line Splices

Cold applied in-line splices that require no heating for installation and provide environmental sealing against moisture using a flame retardant silicone based gel sealing system and electrical isolation using a polymer outer layer. The crimp barrels of these splices are made from tin plated copper and the transparent polyvinylidene fluoride insulation sleeves have a colour coded end cap at either end. These cold applied in-line splices provide protection and sealing on all conventional MIL spec and commercial wire insulation systems.
Stock number 782-4755 is for use with a wire range of 26, 24, 22 and 20 AWG and has red colour coded caps at either end
Stock number 782-4768 is for use with a wire range of 18 to16 AWG and has blue colour coded caps at either end
Stock number 782-4759 is for use with a wire range of 14 to12 AWG and has yellow colour coded caps at either end

Note

An AD-1381 or approved M22520/44-01 crimp tool must be used for proper installation of these devices.

Standards

Meets or exceeds the following: SAE-AMS-DTL-23053/8 (Insulation sleeve), SAE-AS81824/12
Under qualification for SAE AS81824 and AS81824/12

Splices

Specificaties
Kenmerk Waarde
Splice Type Butt
Wire Size 14 12 AWG
Overall Length 38.7mm
Insulation Insulated
Colour Yellow
tijdelijk niet op voorraad – nieuwe voorraad verwacht op 03/03/2020, met een levertijd van 2 à 3 werkdagen.
Prijs Each
9,03
(excl. BTW)
10,93
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
9,03 €
5 - 24
7,66 €
25 - 74
6,33 €
75 - 149
6,23 €
150 +
6,22 €
Related Products
CoolSplice wire splice connectors suitable for splicing 0.34 ...
Description:
CoolSplice wire splice connectors suitable for splicing 0.34 mm² to 0.75 mm² solid and stranded wire and producing an industry proven reliable connection. These CoolSplice splice wire connectors use a simple push button termination method allowing easy factory or field ...
MiniSeal high performance immersion-resistant crimp splices designed to ...
Description:
MiniSeal high performance immersion-resistant crimp splices designed to provide long-term performance and excellent reliability in challenging environments. These MiniSeal splices have a lightweight, low profile design for use in applications where the need for space saving and environmental sealing is ...
Poke-Home wire-to-wire connectors have been proven to be ...
Description:
Poke-Home wire-to-wire connectors have been proven to be very simple and reliable over the past several years. Until today, they have been focused on the light industrial wire gauge ranges of 18AWG to 24AWG. The latest product has just been ...
*Please note this product is now sourced from ...
Description:
*Please note this product is now sourced from an RS PRO supplier due to high demand*Gel filled and gas tight, the RS PRO splice connectors are widely used in the telecoms industry and other fine wire applications. Wires are simply ...