TE Connectivity MiniSeal Butt Wire Splice Connector, Red, Insulated, Tin Plated 0.15 → 0.75 mm²

Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: MX
Productomschrijving

TE Connectivity MiniSeal High Performance Immersion-Resistant Crimp Splices

MiniSeal high performance immersion-resistant crimp splices designed to provide long-term performance and excellent reliability in challenging environments. These MiniSeal splices have a lightweight, low profile design for use in applications where the need for space saving and environmental sealing is critical. MiniSeal splices consist of a plated copper crimp barrel, meltable inserts and a heat-shrinkable transparent sealing sleeve. The insulation sleeve provides environmental protection to the electrical connection against liquids such as hydraulic fluid, aviation fuel and lubrication fluids and the resulting chemical and galvanic corrosion. The heat-shrinkable sleeve also provides strain relief for the splice. Stock numbers with part numbers D-436-36/37/38 are MIL-S-81824/1 qualified and are suitable for use on aircraft, aerospace vehicles and similar applications where exposure to severe wind and high moisture occurs.
For suitable crimp tool see stock number 444-5693, a heating tool and reflector attachment must also be used.

Features and Benefits

Small and lightweight design
Easy one-step installation
Immersion resistant
Environmentally sealed against liquid penetration and resulting corrosion
Suitable for use in harsh environments
MIL spec M8184/1 versions available

Applications

These MiniSeal immersion resistant crimp splices are suitable for use in harsh environments within the aerospace and defence industries

Additional Data
Stock Number Manufacturer Part Number Insulation Colour Plating Crimp Barrel Size Side 1 Sealing Insert I.D. Side 1 Max No Of Wires Side 2 Sealing Insert I.D. Side 2 Max No Of Wires
712-2359 6-1195131-3 (D-436-36) Red Tin 0.15 - 0.75mm2 2.16mm 2 2.16mm 2
444-5659 D-436-36 Red Tin 0.15 - 0.75mm2 2.16mm 2 2.16mm 2
680-3082 650075-000 (D-436-37) Blue Tin 0.39 - 1.34mm2 2.79mm 2 2.79mm 2
444-5665 D-436-37 Blue Tin 0.39 - 1.34mm2 2.79mm 2 2.79mm 2
444-5687 D-436-38 Yellow Tin 0.95 - 3.37mm2 4.32mm 2 4.32mm 2
Voltage Drop 6.9 mV @ 4.5A vs 8.1mV for an equal length of wire
Operating Temperature Range -55°C to +150°C
Insulation Resistance 5000MΩ
Dielectric Strength 2.5kV

Standards

MIL-S-81824/1

Specificaties
Kenmerk Waarde
Splice Type Butt
Wire Size 0.15 → 0.75 mm²
Overall Length 12.95mm
Diameter 2.03mm
Insulation Insulated
Colour Red
Series MiniSeal
Contact Plating Tin
Thickness 0.76mm
6725 op voorraad - levertijd is 1 werkdag(en).
Prijs Each (In a Pack of 25)
1,56
(excl. BTW)
1,89
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
25 - 100
1,56 €
39,00 €
125 - 600
1,385 €
34,625 €
625 - 1225
1,264 €
31,60 €
1250 - 2475
1,146 €
28,65 €
2500 +
1,09 €
27,25 €
*prijsindicatie
Related Products
TERMI-FOIL SOLISTRAND wire terminals for use in the ...
Description:
TERMI-FOIL SOLISTRAND wire terminals for use in the manufacture of transformers making it possible to use aluminium foil strip instead of copper wire windings. These TERMI-FOIL wire terminals can be applied to bare, insulated, anodized or coated aluminium and bare ...
From RS PRO, a selection of insulated ferrules ...
Description:
From RS PRO, a selection of insulated ferrules or Butt Connectors designed for crimping electrical wires. The tube-shaped terminals act as a solderless cable joint allowing electrical current to flow safely from one wire to another. Professionally designed using high-quality ...
Quick Splice IDC wire splice connectors made from ...
Description:
Quick Splice IDC wire splice connectors made from brass with a colour coded nylon insulation. These Quick Splices provide a simple and time saving wire connection method. The splice is simply placed over the existing wire, the additional wire inserted ...
TE heat shrinkable pre-insulated nylon splices and crimp ...
Description:
TE heat shrinkable pre-insulated nylon splices and crimp terminals provide reliable connections, especially where environmental sealing is important. Covering cable sizes from 0.5mm - 6.0mm², they are designed for use where water or condensation may be encountered, or where abrasion ...