TE Connectivity D-436 Wire Splice Connector, Insulated, Tin Plated 16 12 AWG

Wetgeving en conformiteit
Land van herkomst: MX

TE Connectivity MiniSeal High Performance Immersion-Resistant Crimp Splices

MiniSeal high performance immersion-resistant crimp splices designed to provide long-term performance and excellent reliability in challenging environments. These MiniSeal splices have a lightweight, low profile design for use in applications where the need for space saving and environmental sealing is critical. MiniSeal splices consist of a plated copper crimp barrel, meltable inserts and a heat-shrinkable transparent sealing sleeve. The insulation sleeve provides environmental protection to the electrical connection against liquids such as hydraulic fluid, aviation fuel and lubrication fluids and the resulting chemical and galvanic corrosion. The heat-shrinkable sleeve also provides strain relief for the splice. Stock numbers with part numbers D-436-36/37/38 are MIL-S-81824/1 qualified and are suitable for use on aircraft, aerospace vehicles and similar applications where exposure to severe wind and high moisture occurs.
For suitable crimp tool see stock number 444-5693, a heating tool and reflector attachment must also be used.

Features and Benefits

Small and lightweight design
Easy one-step installation
Immersion resistant
Environmentally sealed against liquid penetration and resulting corrosion
Suitable for use in harsh environments
MIL spec M8184/1 versions available


These MiniSeal immersion resistant crimp splices are suitable for use in harsh environments within the aerospace and defence industries

Additional Data
Stock Number Manufacturer Part Number Insulation Colour Plating Crimp Barrel Size Side 1 Sealing Insert I.D. Side 1 Max No Of Wires Side 2 Sealing Insert I.D. Side 2 Max No Of Wires
712-2359 6-1195131-3 (D-436-36) Red Tin 0.15 - 0.75mm2 2.16mm 2 2.16mm 2
444-5659 D-436-36 Red Tin 0.15 - 0.75mm2 2.16mm 2 2.16mm 2
680-3082 650075-000 (D-436-37) Blue Tin 0.39 - 1.34mm2 2.79mm 2 2.79mm 2
444-5665 D-436-37 Blue Tin 0.39 - 1.34mm2 2.79mm 2 2.79mm 2
444-5687 D-436-38 Yellow Tin 0.95 - 3.37mm2 4.32mm 2 4.32mm 2
Voltage Drop 6.9 mV @ 4.5A vs 8.1mV for an equal length of wire
Operating Temperature Range -55°C to +150°C
Insulation Resistance 5000MΩ
Dielectric Strength 2.5kV





Kenmerk Waarde
Wire Size 16 12 AWG
Minimum Wire Size mm² 1.19mm²
Maximum Wire Size mm² 3.37mm²
Overall Length 27.94mm
Diameter 4.32mm
Minimum Wire Size AWG 16AWG
Maximum Wire Size AWG 12AWG
Insulation Insulated
Insulation Material PVDF
Series D-436
Contact Material Copper Alloy
Contact Plating Tin
980 op voorraad - levertijd is 1 werkdag(en).
Prijs Each (In a Pack of 10)
(excl. BTW)
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
10 - 40
3,771 €
37,71 €
50 +
3,583 €
35,83 €
Related Products
A series of Abbatron Smith insulated binding posts ...
A series of Abbatron Smith insulated binding posts with insulated plastic head. All are machined of the best materials and inspected. Have sufficient spring tension which assures great holding power and minimum contact resistance. Unsinulated versions are also available: 914-1087. ...
TE heat shrinkable pre-insulated nylon splices and crimp ...
TE heat shrinkable pre-insulated nylon splices and crimp terminals provide reliable connections, especially where environmental sealing is important. Covering cable sizes from 0.5mm - 6.0mm², they are designed for use where water or condensation may be encountered, or where abrasion ...
PIDG wire caps for use with either stripped ...
PIDG wire caps for use with either stripped or unstripped wire ends. These PIDG wire caps consist of a precision-formed metal wire barrel containing serrations which provide maximum contact and tensile strength after crimping. This barrel is enclosed in a ...
PIDG (Pre-Insulated Diamond Grip) wire crimp splice terminals ...
PIDG (Pre-Insulated Diamond Grip) wire crimp splice terminals designed for uniform reliability in the most difficult circuit environments. These PIDG wire splice terminals consist of a precision-formed high conductivity copper body and barrel. The wire barrel is surrounded with both ...