Elesa Crank Handle 44311

  • RS-stocknr. 859-177
  • Fabrikantnummer 44311
  • Fabrikant Elesa
Datasheets
Wetgeving en conformiteit
N.v.t.
Land van herkomst: IT
Productomschrijving

GF Reinforced Polymer, Steel Insert, Square Hole

Very similar in design to round bore crank handle range. Black oxide steel insert with H9 tolerance square through hole.

//media.rs-online.com/t_line/L859177-01.gif
Specificaties
Kenmerk Waarde
Handle Type Revolving
Square Hole Size 12 x 12mm
Handle Radius 100mm
Handle Material Polyamide
6 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
33 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
13,54
(excl. BTW)
16,38
(incl. BTW)
Aantal stuks
Per stuk
1 +
13,54 €
Related Products
Used where minimal protrusion is requiredExcellent anti-corrosive propertiesChrome ...
Description:
Used where minimal protrusion is requiredExcellent anti-corrosive propertiesChrome plated finish particularly suited to the food, pharmaceutical and other clean industriesIn both positions the handle is retained by a spring loaded detent.
Manufactured from zinc plated steelCompact, screw fixing, with ...
Description:
Manufactured from zinc plated steelCompact, screw fixing, with low clearanceReinforced handle60kgf loading.
Stainless steel 18//8 leaf springHandle remains in either ...
Description:
Stainless steel 18//8 leaf springHandle remains in either open or closed positionMoulded comfort grip handle70kgf loading.
Flush mounted handle with return spring.Stops at 90 ...
Description:
Flush mounted handle with return spring.Stops at 90 °.Black moulded rubber grip.Application: flight cases.