Huco Coupling

  • RS-stocknr. 809-0723
  • Fabrikantnummer 047.10.1818.RS
  • Fabrikant Huco
Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: GB
Productomschrijving

Double Loop Couplings

Flexible couplings suitable for the correction of radial, angular and axial misalignment. The hubs manufactured from a zinc plated steel alloy with a passivated coating for improved corrosion resistance and connected with a Hytrel polyester elastomer flex element giving excellent strength and heat and chemical resistance. Easy to install set screw fitting and suitable up to speeds of 3000 RPM.

Huco Double Loop Couplings

Specificaties
Kenmerk Waarde
Bore 4mm
Coupling Types Double Loop Elastomer
Length 27mm
Torque Rating 0.5Nm
Misalignment - Angular 10°
Misalignment - Axial 4.5mm
7 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
17 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
14,84
(excl. BTW)
17,96
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
14,84 €
5 - 9
14,38 €
10 +
13,92 €
Related Products
The bellows is a traditional mechanism for flexibly ...
Description:
The bellows is a traditional mechanism for flexibly connecting two rotating shafts with angular, parallel and axial offset capability. Can be used with the RS range of bore reducers. High torsional stiffnessHigh quality of translation of motionSuitable for drives associated ...
The Huco coupling has a 32mm OD. This ...
Description:
The Huco coupling has a 32mm OD. This is multi-beam type 6, stainless steel clamp 14mm x 14mm coupling. This is readily accommodated by any combination of axial motion, angular and parallel misalignment. Its 3 start helical cut design provides ...
Ruland MBS15-4-4-A is a bellows coupling with 4mm ...
Description:
Ruland MBS15-4-4-A is a bellows coupling with 4mm x 4mm bores, 15.0mm OD, and 27.2mm length. It is zero-backlash and has a balanced design for reduced vibration at high speeds. MBS15-4-4-A is comprised of two anodized aluminum hubs and a ...
The Ruland bellows coupling has a 19mm OD, ...
Description:
The Ruland bellows coupling has a 19mm OD, 30.2mm length and 6mm x 5mm bore with clamp fastening. This is readily accommodated by any combination of axial motion, angular and parallel misalignment. It is comprised of two anodized aluminium hubs ...