Huco Electrodeposited Nickel 25mm OD Bellows Coupling with Set Screw Fastening

  • RS-stocknr. 748-291
  • Fabrikantnummer 321.25.3535
  • Fabrikant Huco
Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: FR
Productomschrijving

Nickel Bellows Couplings

The bellows is a traditional mechanism for flexibly connecting two rotating shafts with angular, parallel and axial offset capability. Can be used with the RS range of bore reducers.

High torsional stiffness
High quality of translation of motion
Suitable for drives associated with instruments
Grub screw fixing

Note

Service life can be affected with load reversal applications or when driving loads incrementally. Bore size attirbute refers to dimensions B1 and B2 in in that order.

//media.rs-online.com/t_line/L0748291-20.gif
Specificaties
Kenmerk Waarde
Bore 12mm
Coupling Types Bellows Coupling
Outside Diameter 25mm
Length 33mm
Fastening Type Set Screw
Torque Rating 132Ncm
Torsional Stiffness 515Nm/rad
Moment of Inertia 161 x 10^-8kg/m²
Misalignment - Angular 10°
Misalignment - Parallel +2.7 → -3.5mm
Misalignment - Axial 2.07mm
Bellows Material Electrodeposited Nickel
tijdelijk niet op voorraad – nieuwe voorraad verwacht op 17/09/2020, met een levertijd van 2 à 3 werkdagen.
Prijs Each
85,47
(excl. BTW)
103,42
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
85,47 €
5 - 9
82,83 €
10 +
80,14 €
Related Products
Integral flexible couplings suitable for BHF (end shaft) ...
Description:
Integral flexible couplings suitable for BHF (end shaft) hollow shaft encodersTheir use is particularly recommended for high resolution applicationsControflex couplings manufactured from Alu/POM (Poly Oxide Methyl)High torqueLow moment of inertia, vibration absorption and are electrically insulatingReducers are ...
Ruland FCMR32-12-10-A is a six beam coupling with ...
Description:
Ruland FCMR32-12-10-A is a six beam coupling with 12mm x 10mm bores, 31.8mm OD, and 44.5mm length. It is machined from a single piece of material and features two sets of three spiral cuts. This gives it higher torque capacity, ...
Ruland FCMR32-12-8-A is a six beam coupling with ...
Description:
Ruland FCMR32-12-8-A is a six beam coupling with 12mm x 8mm bores, 31.8mm OD, and 44.5mm length. It is machined from a single piece of material and features two sets of three spiral cuts. This gives it higher torque capacity, ...
Designed to perform where higher speeds, greater misalignment, ...
Description:
Designed to perform where higher speeds, greater misalignment, and limited lubrication would exceed the capabilities of other couplings. Each coupling is manufactured as one piece, thereby eliminating mechanical joints and possible failure points.Two fixing styles available:,Typical applications include encoders, ...