RS PRO 7 Digit, Digital Counter, 10Hz, 12 V dc

Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: IN
Productomschrijving

7-digit Electromechanical Impulse Counter

RS Pro Electromechanical impulse counters are compact in size and suitable for panel mounting.

• 7-digit (3.6 mm), non-resettable
• Compact size & robust design
• Panel mounting
• High degree of accuracy & reliability
• Wide temperature range
• 12 V dc or 24 V dc supply voltage (depending on model)
• Shock & vibration proof

Specificaties
Kenmerk Waarde
Supply Voltage 12 V dc
Count Mode Pulse
Display Type Digital
Input Type Voltage
Connection Type Screw
Reset Method No Reset
Number of Digits 7
Mounting Type Panel Mount
Digit Height 3.6 mm
Maximum Count Frequency 10Hz
Display Range 0 → 9999999
Maximum Operating Temperature +50°C
Approvals CE, NEMA 4X, RoHS
Cutout Width 36.8mm
Minimum Operating Temperature -5°C
Depth 53.45mm
Function Impulse Counter
Maximum Temperature +50°C
Cutout Size 36.8 x 24.1 mm
Cutout Height 24.1mm
Series RS PRO
Measurement Range 0 → 9999999
Meter Type Electronic
37 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
21,93
(excl. BTW)
26,54
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
21,93 €
5 - 9
21,28 €
10 +
20,41 €
Related Products
5 counting functions (multi-functional)Freely definable scaling factorTwo-colour display ...
Description:
5 counting functions (multi-functional)Freely definable scaling factorTwo-colour display of actual and set value (red & orange)Backlit LCD displayEasy preset using rocker switches.
Sentron series mechanical counters are used for accurately ...
Description:
Sentron series mechanical counters are used for accurately monitoring production and service times, which enables the exact planning and monitoring of production sequences. The accuracy of the counters also enables them to monitor maintenance cycles and warranty times.The mechanical counters ...
6-digit electro-mechanical totalising counters.Counting speed for pulse / ...
Description:
6-digit electro-mechanical totalising counters.Counting speed for pulse / pause ratio = 1:- 20 pulses / sec. in Vdc minimum duration 25 ms / max. unlimited- 10 pulses / sec. in Vac minimum duration 50 ms/max. unlimited.Supplied with plug-in solder clips.Screw ...
Programmable with microprocessors, comprising a general totaliser, a ...
Description:
Programmable with microprocessors, comprising a general totaliser, a counter with 2 presets, single preset counter programmable as a tachometer, & an hour meterprogrammable scaling and reset modesLED DisplayProgrammable zero shift and permanent display of the programmed parameterOperating temperature 0 to ...