Hengstler TICO 732 Counter, 6 Digit, 5kHz, 12 → 24 V dc
- RS-stocknr.:
- 200-1083
- Fabrikantnummer:
- 0 732 020
- Fabrikant:
- Hengstler
Niet meer leverbaar – bekijk hieronder eventuele alternatieven of neem contact op met onze Customer Service
- RS-stocknr.:
- 200-1083
- Fabrikantnummer:
- 0 732 020
- Fabrikant:
- Hengstler
Datasheets
Wetgeving en conformiteit
- Land van herkomst:
- CN
Productomschrijving
Zero/Single Preset - Counter/tachometer/timer
Multifunction units housed in a panel mounting case (DIN 43700)
Prescaler option - multiplier programmable from 0.001 to 9.999 (counter and tachometer modes)
The unit may be set in any of three modes: Counter Mode; Tachometer Mode; Time Meter Mode
Counter mode: can be programmed for quadrature, differential, count/direction
Tachometer mode: incoming pulses are counter per gate time, which can be pre-selected. Over speed or under speed can also be indicated
Time meter mode: programmable time ranges and decimal point
45 x 45mm panel cutout
Prescaler option - multiplier programmable from 0.001 to 9.999 (counter and tachometer modes)
The unit may be set in any of three modes: Counter Mode; Tachometer Mode; Time Meter Mode
Counter mode: can be programmed for quadrature, differential, count/direction
Tachometer mode: incoming pulses are counter per gate time, which can be pre-selected. Over speed or under speed can also be indicated
Time meter mode: programmable time ranges and decimal point
45 x 45mm panel cutout
Hengstler Digital Counter
The Hengstler TICO 732 series digital counter is a single preset and multifunctional panel mount device that includes a timer, counter and tachometer. This counter has a voltage input simple to program. It also has a 6-digit LED display. It has a voltage rating between 12VDC and 24VDC. The user can set the unit in counter mode, tachometer mode, and time meter mode. The counter mode and time meter mode can be programmed for quadrature, differential, and count/direction. Whereas in the case of tachometer mode, incoming pulses are counter per gate time that can be pre-selected. The user can also indicate over-speed or under-speed and time meter mode that are programmable time ranges and decimal points. This counter has a maximum count frequency of 5KHz.
Features and Benefits
Keypad locking function
Prescaler option - multiplier programmable from 0.001 to 9.999
Plug-in screw terminal connection
Panel cut-out dimensions are 45mm x 45mm
Bi-directional counting
Front dimensions 48mm x 48mm
Operating temperature ranges between 0°C and 50°C
Prescaler option - multiplier programmable from 0.001 to 9.999
Plug-in screw terminal connection
Panel cut-out dimensions are 45mm x 45mm
Bi-directional counting
Front dimensions 48mm x 48mm
Operating temperature ranges between 0°C and 50°C
Applications
Industrial counting applications
Control and monitoring systems
Manufacturing assembly line
Control and monitoring systems
Manufacturing assembly line
Hengstler Panel Mounting 48 x 48
Range of resettable counters with data retention rated at greater then 10 years. Prescaler options and Multiplier scaling outputs for correctly displaying engineering units. Units have a maximum count frequency of either 30Hz or 5kHz depending on setting. Inputs are either NPN/PNP signal or contact closure.
Specificaties
Kenmerk | Waarde |
|---|---|
| Supply Voltage | 12 → 24 V dc |
| Count Mode | Hours |
| Display Type | LED |
| Input Type | Voltage |
| Connection Type | Screw |
| Reset Method | Automatic, Manual |
| Number of Digits | 6 |
| Mounting Type | Panel Mount |
| Output / Interface | Relay, Transistor |
| Digit Height | 7.6 mm |
| Maximum Count Frequency | 5kHz |
| Display Range | -99999 → 999999 |
| Series | TICO 732 |
| Maximum Operating Temperature | +50°C |
| Minimum Operating Temperature | 0°C |
| Measurement Range | -99999 → 999999 |